Facebook

12

  •

    Inlay Rebater TCT

    £70.35 – £88.70
    Produces a slot to take inlays of a different col0ur to produce a line effect joint
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Perfect V Engraving Small Diameter Replacement TC Tip

    £73.88 – £87.31
    This range of single flute RT cutters are used to produce chamfers and V grooves on softwood, hardwood, MDF and other manmade materials. The design in allows a perfect V in the bottom of the groove. The tips are reversible and sold in boxes of 10.  
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Bevel and Chamfer Bearing Guided Replacement TC Tip

    £96.34
    Tips are reversible and are sold in boxes of 10.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Overlay Trimmer Bearing Guided TCT

    £120.07 – £154.46
    TCT Double Flute For edging sinks and vanity bowls. The special taper on the Bearing sleeve allows for perfect guide following around the inside of the bowl.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Rebate Bearing Guided Replacement TC Tip

    £93.28 – £136.11
    A range of rebate cutters bearing guided, bearings can be changed to a different diameter to produce various rebate depths. The TTRCB95-1/2RT and TTRCB95-8RT  are fitted with the TT3/8-B37514 bearing and also come with the TT1/2-B127,  TTB15 and TTB19 bearings. The TTRCb9512RT is fitted with 2 - TT1/2-B127 bearings and can then be used in conjunction with the TTRR range of aluminium sleeves to produce the various rebate depths. These rings are placed in the middle of the 2 bearings which then keep them secure whilst routing. If you take the diameter dimension of the cutter minus the diameter dimension of the ring and divide by 2 this will give you the rebate depth. Tips are reversible and are sold in boxes of 10
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Surface Spoil board Planer TCT

    £36.70 – £94.10
    SPOILBOARD SURFACE PLANER 2 & 3 WING TCT For trimming aluminium flashing. DESCRIPTION TTSMC20 has a shear action for finer finish.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Spiral 1 flute router cutter for general use on wood based materials STC

    £15.00 – £75.00
    With either an up or downward cutting action. NEG code denotes downward cutting action, POS code denotes upward cutting action, For use with CNC machines.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Spiral 3 flute router cutter for general use on wood based materials STC

    £40.00 – £270.00
    With either an up or downward cutting action. NEG code denotes downward cutting action, POS code denotes upward cutting action, For use with CNC machines.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Spiral 3 flute with chipbreakers for general use on wood based materials STC

    £43.00 – £435.85
    With either an up or downward cutting action the chipbreaker design allows for faster feed rates where end finish is less important. NEG code denotes downward cutting action, POS code denotes upward cutting action, For use with CNC machines.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Spiral 2 flute router cutter for general use on wood based materials STC

    £38.23 – £420.56
    With either an up or downward cutting action. NEG code denotes downward cutting action, POS code denotes upward cutting action, For use with CNC machines.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Spiral compression fluted router cutter for nesting STC

    £39.76 – £101.19
    With an up and downard cutting action on the one tool, the fluted compression style allows for fine finish on the top and bottom edges of the board. NEG code denotes downward cutting action, POS code denotes upward cutting action, For use with CNC machines.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Waterfall Profile Bearing Guided TCT

    £91.76 – £94.81
    TCT Double Flute Helps to reduce the effect of overlay joint line. DESCRIPTION Sometimes called 'waterfall effect' giving a non-drip edge to a worktop. TTXC214 has a shorter cut length, ideal for use on 12.5mm thick material. TTXC216 is fitted with self-guided Bearing for use with 15mm thick material. TTXC221 is ideal for use on 19mm (3/4 inch) thick material.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Ventilation Slot TCT

    £79.51 – £87.17
    TCT Two Flute Ventilation Slot Slots and produces a radius on the upper edge in one pass.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • V Groove Folding Tool

    £45.88 – £93.28
    TCT Two Flute Grooving Soft Form Single flute TCT and RT versions available.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Tongue and Groove TCT

    £125.40
    TCT Double Flute These cutters are designed to produce top surface perfect butt joints. Suitable for materials 6mm (15/64 inch) to 17mm (43/64 inch) thick.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Tapered Repair Cutter TCT

    £56.54 – £64.37
    Tapered Repair Cutter Designed specifically to repair small imperfections in solid surface material.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Surface Spoilboard Planer TCT

    £120.82 – £126.92
    TCT Spoilboard For trimming bowls, trepanning and face milling. Ideal for removing flashing and large surface areas of raised draining board channels.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Step Down

    £73.41
    TCT Double Flute For creating a 'step down' shadow line between bowl and sheet.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Straight Double Flute Downard Sheared Cut TCT

    £44.36 – £55.06
    TCT Double Flute Shear action downcut to reduce breakout for longer life and improved performance. Pushes waste material away from the operator.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Rounding Over Bearing Guided TCT

    £159.05 – £178.94
    TCT Two Flute Rounding Over Fitted with a Shank mounted Bearing. First cut with TTXC301, finshing using matching TTXC321. Eliminates flat on edge.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Roman Ogee Bearing Guided TCT

    £110.10
    TCT Two Flute Spanish Edge with Bearing For all types of decorative edge profiling.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Straight Single Flute TCT

    £33.64 – £38.23
    TCT Single Flute A high performance, single flute, cutter for extra clearance when cutting apertures and shaping work. The single flute gives a stronger backing support to the cutting edge.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Reverse Bevel

    £87.17
    TCT Double Flute For bevelling inside bowl tops and similar applications. Avoids need to turn workpiece.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Raised Panel Bevel Bearing Guided TCT

    £105.53 – £120.82
    TCT Double Flute TTXC611 is the perfect cutter for panel raising work. TTXC616 is designed for large 45 degree chamfer work with guide Bearing.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Rounding Over Bearing Guided TCT

    £78.00 – £149.87
    TCT Double Flute Fitted with self-guiding Bearing for rounding over. See cutters TTXC301 and TTXC321 for complete rounding over.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Overlay Trimmer Bearing Guided TCT

    £87.17 – £91.76
    TCT Double Flute For edging sinks and vanity bowls. The special taper on the Bearing sleeve allows for perfect guide following around the inside of the bowl.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Non Drip TCT

    £87.17
    TCT Double Flute This cutter produces a 'waterfall' effect on a worktop. Can be used against a wall for splashback.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Knuckle Bone TCT

    £113.17
    TCT Double Flute Great care should be exercised when using this cutter to avoid 'cutter wander'. Use correct jig, template or side fence. Use a guide bush in conjunction with an offset template.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Inlay Trimmer Bearing Guided TCT

    £39.76 – £120.82
    TCT Double Flute Mini trimmers give a super fine finish. Ideal for cutting out small recesses in wall cladding for electrical fittings and suitable for trimming inlay flush and other trimming operations. Use TTTB22 Bearing for trimming overhanging countertops on undermount bowls.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Four Flute Slotter TCT

    £148.35
    TCT Four Wing Has many cutting and grooving uses in decorative and repair work. Particularly suitable for bowl replacement. Lower illustration shows method of removing bowl from worktop. DESCRIPTION Has many cutting and grooving uses in decorative and repair work. Particularly suitable for bowl replacement.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Hob Cutter TCT

    £160.57 – £185.05
    TCT Two Flute Hob Cutter Used to produce, in one pass, the aperture in which the hob unit sits.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Four Flute Rebater TCT

    £181.99
    TCT Four Flute Cutter For grooving and heavy rebate work.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Drain Board Heavy Duty TCT

    £79.51 – £96.34
    TCT Double Flute Primarily used to produce drain board channels. For use with template and guide bush. DESCRIPTION Primarily used to produce drain board channels. For window sections, designed to help displace water and moisture off window and door frames. Can also be used as soap dish cutter. For use with template and guide bush.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Downturn Rebate Cutter TCT

    £73.59
    Downturn Rebate Cutter Has many cutting and grooving uses in decorative and repair work. Particularly suitable for bowl replacement. Lower illustration shows method of removing bowl from worktop. DESCRIPTION To produce a 13mm rebate for the downturns on solid surface worktops. Fitted with a plastic sleeved bearing TTPB127.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Coving TCT

    £107.05
    TCT Double Flute 90 degree joint fabrication radius cutter, suitable for splashback and other 90 degree joints.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Cove Mould Bearing Guided TCT

    £93.28
    TCT Two Flute Cove Mould With Bearing Two flute half round cutter. Ideal for a scalloped edge finish. For all types of decorative edge profiling.
    Select options This product has multiple variants. The options may be chosen on the product page Details