Facebook

18000

  •

    Plug Maker Tapered TCT

    £146.81 – £255.40
    TCT RPS Bevel Hole These bevel hole cutters are specially developed to bevel an existing hole or to make new bevelled holes. DESCRIPTION These bevel hole cutters are specially developed to bevel an existing hole or to make new bevelled holes. TTXC906-18 and TTXC906-23 bevel plug cutters can be used to make accurate plugs for the holes produced by the TTXC901 range of bevel hole cutters.
    Select options Details

  • Bevel Plug/Bevel Hole Set TCT

    £1,108.69
    7 PIECE TCT RPS Cutter Set 1/2 Shanks Specially made tooling for repair of 'wrongly made' holes and also for decorative effects using plugs in other colours. This set includes all the TTXC901 and TTXC906 cutters. DESCRIPTION Use the Titman Plug system for a perfect repair. Specially made tooling for repair of 'wrongly made' holes and also for decorative effects using plugs in other colours. This set includes all the TTXC901 and TTXC906 cutters.
    Select options Details

  • Cove Mould Bearing Guided TCT

    £93.28
    TCT Two Flute Cove Mould With Bearing Two flute half round cutter. Ideal for a scalloped edge finish. For all types of decorative edge profiling.
    Select options Details

  • Downturn Rebate Cutter TCT

    £73.59
    Downturn Rebate Cutter Has many cutting and grooving uses in decorative and repair work. Particularly suitable for bowl replacement. Lower illustration shows method of removing bowl from worktop. DESCRIPTION To produce a 13mm rebate for the downturns on solid surface worktops. Fitted with a plastic sleeved bearing TTPB127.
    Select options Details

  • Non Drip TCT

    £87.17
    TCT Double Flute This cutter produces a 'waterfall' effect on a worktop. Can be used against a wall for splashback.
    Select options Details

  • Overlay Trimmer Bearing Guided TCT

    £87.17 – £91.76
    TCT Double Flute For edging sinks and vanity bowls. The special taper on the Bearing sleeve allows for perfect guide following around the inside of the bowl.
    Select options Details

  • Rounding Over Bearing Guided TCT

    £78.00 – £149.87
    TCT Double Flute Fitted with self-guiding Bearing for rounding over. See cutters TTXC301 and TTXC321 for complete rounding over.
    Select options Details

  • Raised Panel Bevel Bearing Guided TCT

    £105.53 – £120.82
    TCT Double Flute TTXC611 is the perfect cutter for panel raising work. TTXC616 is designed for large 45 degree chamfer work with guide Bearing.
    Select options Details

  • Reverse Bevel

    £87.17
    TCT Double Flute For bevelling inside bowl tops and similar applications. Avoids need to turn workpiece.
    Select options Details

  • Roman Ogee Bearing Guided TCT

    £110.10
    TCT Two Flute Spanish Edge with Bearing For all types of decorative edge profiling.
    Select options Details

  • Rounding Over Bearing Guided TCT

    £159.05 – £178.94
    TCT Two Flute Rounding Over Fitted with a Shank mounted Bearing. First cut with TTXC301, finshing using matching TTXC321. Eliminates flat on edge.
    Select options Details

  • Tongue and Groove TCT

    £125.40
    TCT Double Flute These cutters are designed to produce top surface perfect butt joints. Suitable for materials 6mm (15/64 inch) to 17mm (43/64 inch) thick.
    Select options Details

  • V Groove Folding Tool

    £45.88 – £93.28
    TCT Two Flute Grooving Soft Form Single flute TCT and RT versions available.
    Select options Details

  • Waterfall Profile Bearing Guided TCT

    £91.76 – £94.81
    TCT Double Flute Helps to reduce the effect of overlay joint line. DESCRIPTION Sometimes called 'waterfall effect' giving a non-drip edge to a worktop. TTXC214 has a shorter cut length, ideal for use on 12.5mm thick material. TTXC216 is fitted with self-guided Bearing for use with 15mm thick material. TTXC221 is ideal for use on 19mm (3/4 inch) thick material.
    Select options Details

  • Rebate Bearing Guided Replacement TC Tip

    £93.28 – £136.11
    A range of rebate cutters bearing guided, bearings can be changed to a different diameter to produce various rebate depths. The TTRCB95-1/2RT and TTRCB95-8RT  are fitted with the TT3/8-B37514 bearing and also come with the TT1/2-B127,  TTB15 and TTB19 bearings. The TTRCb9512RT is fitted with 2 - TT1/2-B127 bearings and can then be used in conjunction with the TTRR range of aluminium sleeves to produce the various rebate depths. These rings are placed in the middle of the 2 bearings which then keep them secure whilst routing. If you take the diameter dimension of the cutter minus the diameter dimension of the ring and divide by 2 this will give you the rebate depth. Tips are reversible and are sold in boxes of 10
    Select options Details

  • V Groover and Tracery Replacement TC Tip

    £269.16 – £319.63
    This range of single flute replacement tip cutters are used to produce chamfers and V grooves on softwood, hardwood, MDF and other manmade materials. The design and the specially ground tip produce a perfect V in the bottom of the groove. The TC tips are non reversible and are sold singularly.  
    Select options Details

  • Overlay Trimmer Bearing Guided TCT

    £120.07 – £154.46
    TCT Double Flute For edging sinks and vanity bowls. The special taper on the Bearing sleeve allows for perfect guide following around the inside of the bowl.
    Select options Details

  • Bevel and Chamfer Light Duty Replacement TC Tip

    £91.76
    Angles are measured from the horizontal. Tips are reversible and are sold in boxes of 10.
    Select options Details

  • Perfect V Engraving Small Diameter Replacement TC Tip

    £73.88 – £87.31
    This range of single flute RT cutters are used to produce chamfers and V grooves on softwood, hardwood, MDF and other manmade materials. The design in allows a perfect V in the bottom of the groove. The tips are reversible and sold in boxes of 10.  
    Select options Details

  • Inlay Rebater TCT

    £70.35 – £88.70
    Produces a slot to take inlays of a different col0ur to produce a line effect joint
    Select options Details