Facebook

Right Hand

  •

    Worktop Router Cutters TCT

    £198.00
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Cylindrical Borers 2 wing 2 Scribes with 10mm shanks with flat TCT

    £51.99 – £94.81
    DESCRIPTION 2 wing with or without centre point and with or without scribers,  shanks are 10mm with flat on one side and end adjusting screw. Right hand with centre point. These boring bits must be used in fixed head machines only, never in hand-held routing machines or hand-held drills. Softwood, Chipboard - Use Scribers: 15mm-35mm 3000-6000 RPM, 35mm-50mm 3000 RPM, 50mm-100mm 2000 RPM. Hardwood - Use Scribers: 15mm-35mm 3000 RPM, 35mm-50mm 3000 RPM, 50mm-100mm 1500 RPM. MDF - Use Scribers: 15mm-35mm 3000-6000 RPM, 35mm-50mm 3000 RPM, 50mm-100mm 1500 RPM. Laminate - Use Scribers: 15mm-35mm 3000-6000 RPM, 35mm-50mm 3000 RPM, 50mm-100mm 2000 RPM. Diameters of 20mm and above with Scribers will burn at over 6000 RPM. Do not use Scribers on solid laminates. Router Machines: Softwood, Hardwood, Chipboard, MDF, Laminate - No Scribers over 6000RPM: 15mm-35mm 10000 RPM, 35mm-50mm 6000 RPM, 50mm-100mm 3000 RPM.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Dowel Drills 70mm O/All ‘V’ Point with 10mm shank with flat TCT

    £29.05 – £38.23
    A range of 60 degree inclusive V Point drills with 10mm diameter shanks that have a flat on one side and length adjusting screw in the end. Available with right hand or left hand rotation.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Perfect V Engraving Small Diameter Replacement TC Tip

    £73.88 – £87.31
    This range of single flute RT cutters are used to produce chamfers and V grooves on softwood, hardwood, MDF and other manmade materials. The design in allows a perfect V in the bottom of the groove. The tips are reversible and sold in boxes of 10.  
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Bevel and Chamfer Bearing Guided Replacement TC Tip

    £96.34
    Tips are reversible and are sold in boxes of 10.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Bevel and Chamfer Light Duty Replacement TC Tip

    £91.76
    Angles are measured from the horizontal. Tips are reversible and are sold in boxes of 10.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • V Groover and Tracery Replacement TC Tip

    £269.16 – £319.63
    This range of single flute replacement tip cutters are used to produce chamfers and V grooves on softwood, hardwood, MDF and other manmade materials. The design and the specially ground tip produce a perfect V in the bottom of the groove. The TC tips are non reversible and are sold singularly.  
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Rebate Bearing Guided Replacement TC Tip

    £93.28 – £136.11
    A range of rebate cutters bearing guided, bearings can be changed to a different diameter to produce various rebate depths. The TTRCB95-1/2RT and TTRCB95-8RT  are fitted with the TT3/8-B37514 bearing and also come with the TT1/2-B127,  TTB15 and TTB19 bearings. The TTRCb9512RT is fitted with 2 - TT1/2-B127 bearings and can then be used in conjunction with the TTRR range of aluminium sleeves to produce the various rebate depths. These rings are placed in the middle of the 2 bearings which then keep them secure whilst routing. If you take the diameter dimension of the cutter minus the diameter dimension of the ring and divide by 2 this will give you the rebate depth. Tips are reversible and are sold in boxes of 10
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Surface Spoil board Planer TCT

    £36.70 – £94.10
    SPOILBOARD SURFACE PLANER 2 & 3 WING TCT For trimming aluminium flashing. DESCRIPTION TTSMC20 has a shear action for finer finish.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Spiral 1 flute router cutter for general use on wood based materials STC

    £15.00 – £75.00
    With either an up or downward cutting action. NEG code denotes downward cutting action, POS code denotes upward cutting action, For use with CNC machines.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Spiral 3 flute router cutter for general use on wood based materials STC

    £40.00 – £270.00
    With either an up or downward cutting action. NEG code denotes downward cutting action, POS code denotes upward cutting action, For use with CNC machines.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Spiral 3 flute with chipbreakers for general use on wood based materials STC

    £43.00 – £435.85
    With either an up or downward cutting action the chipbreaker design allows for faster feed rates where end finish is less important. NEG code denotes downward cutting action, POS code denotes upward cutting action, For use with CNC machines.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Spiral 3 flute hogging router cutter for general use on wood based materials STC

    £109.43
    With either an up or downward cutting action the rougher / hogging design allows for faster feed rates where end finish is less important. NEG code denotes downward cutting action, POS code denotes upward cutting action,, For use with CNC machines.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Spiral 1 flute for Acrylics, Composites and Light Metals STC

    £37.23 – £69.91
    SINGLE FLUTE SOLID CARBIDE UPCUT SPIRAL For use on plastics, acrylics, foam, ABS, ACP and light metals. DESCRIPTION These tools are designed to give a smooth finish on hard plastics.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Spiral 2 flute router cutter for general use on wood based materials STC

    £38.23 – £420.56
    With either an up or downward cutting action. NEG code denotes downward cutting action, POS code denotes upward cutting action, For use with CNC machines.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Spiral compression fluted router cutter for nesting STC

    £39.76 – £101.19
    With an up and downard cutting action on the one tool, the fluted compression style allows for fine finish on the top and bottom edges of the board. NEG code denotes downward cutting action, POS code denotes upward cutting action, For use with CNC machines.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Reverse Bevel

    £87.17
    TCT Double Flute For bevelling inside bowl tops and similar applications. Avoids need to turn workpiece.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Downturn Rebate Cutter TCT

    £73.59
    Downturn Rebate Cutter Has many cutting and grooving uses in decorative and repair work. Particularly suitable for bowl replacement. Lower illustration shows method of removing bowl from worktop. DESCRIPTION To produce a 13mm rebate for the downturns on solid surface worktops. Fitted with a plastic sleeved bearing TTPB127.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Template profiler with shank mounted bearing TCT

    £38.23 – £93.28
    These router cutters are designed for use on template and pattern work, blind profiling and plunging They have a shank mounted bearing which will run along and follow the template which is attached to the work piece with the end result being an exact duplicate of the template itself.  
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Spiral 2 flute for Acrylics, Composites and Light Metals STC

    £39.76 – £90.23
    STC Spiral The accepted solid carbide cutter for machining and routing acrylics, plastics and Perspex. The helical cut gives a much easier lead into the material preventing snatching and chipping on cut. DESCRIPTION Perfect preparation before flame polishing of Perspex. Downcut for chip-free finish on MFC. DC in product code denotes Downcut. * = For use on very fine acrylics where downward cutting action will prevent vibration and component lifting. Use a P.T.F.E. spray to enhance performance and prevent waste from welding to the tool.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Fire Strip Slotter TCT

    £61.97 – £114.70
    TCT Groover Consists of Groover, Bearing and Arbor. Can be supplied for 10, 15 and 20mm strip. DESCRIPTION Consists of Groover, Bearing and Arbor. Can be supplied for 10, 15, 20 and 25mm strip. For slotting doors with a portable routing machine, using a Guide Bearing to give the correct cutting depth of 4mm. Suits Therma Seal Intumescent Strip.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Perfect V Engraving Replacement TC Tip

    £86.43 – £99.40
    This range of single flute RT cutters are used to produce chamfers and are ideal for V grooves on softwood, hardwood, MDF and other manmade materials. The design and the specially ground tip produce a perfect V in the bottom of the groove. Angles are measured from the vertical, i.e. a TTVGC60SFRT-1/2 has an inclusive angle of 120 degrees on the tool. Cutters come complete with one tip already installed, the L308 tips are reversible the others are non reversble. Tips are sold in boxes of 10.  
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • V Groover TCT

    £35.17 – £133.04
    DESCRIPTION Ideal for veining work, freehand decor for panels and useful for character lining work on sign writing applications in solid timbers. The angle ( measurement A ) is measured from the horizontal. TTVGC45SF-1/2, TTVGC45SF-1/4, TTVGC45SF-12, TTVGC60SF-1/2, TTVGC60SF-1/4, TTVGC60SF-12, TTVGC60SF-8 cut to a point. TTVGCB45-1/4, TTVGCB60-127-1/4 have a shank mounted bearing.  
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Tongue And Groove With Bearing TCT

    £47.41 – £99.40
    DESCRIPTION To achieve a perfect tongued and grooved joint for flooring and paneling use the TTFFC28 in conjunction with a TTG35552-6.35 mini groover ( for the groove ). The same arbor can be used for the TTFFC28 and TTFA20 The TTFA20 is also for use with the TTLDTA style of arbor.  
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Torus Mould Profiles TCT

    £119.28 – £143.75
    TCT Multi-Mould DESCRIPTION TTTOR25 gives an ornate moulding used in full or in part. TTTOR22 is a possible picture rail and cover mould cutter. TTTOR27 ideal to use the complete mould or part for short production runs. Excellent cutter to produce ornate skirting and architrave moulding. TTTOR-B gives a deep cavetto effect with a bead to break up the line of the mould. The fine lines of this cutter make it an excellent choice for matching skirting and architrave. TTTOR-C is a variation of the Torus Mould (TTTOR-T).
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • T Slot TCT & PCD

    £50.47 – £300.00
    TCT T-Slot Square Edged Designed for creating the T-slot in wall panels used in the point of sale industry for shelving and display purposes.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Surface Spoilboard Planer Replacement TC Tip

    £184.44 – £349.00
    Ideal for skimming on CNC routing machines. Tips are reversible and are sold in boxes of 10.  
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Stair Nosing TCT

    £61.48 – £104.51
    TCT Stair Nosing This range have a flatter style to a standard full bull nose offering an alternative profile on stair treads, window boards and these can also be used to relieve sharp corners on the standard board thickness. DESCRIPTION The TTSNCB10 has a bottom bearing.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Staff Bead – Full Bullnose TCT

    £77.99 – £140.68
    TCT Bullnose Staff Bead A full bullnose radius for stair treads, nosings, window boards and edge mouldings Flats at top and bottom of the cutting edges create fillets on stock thicker than the nose diameter.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Splay and Once Rounded – Shark Nose TCT

    £92.22 – £122.34
    TCT Shark Nose Designed to finish off worktops, table tops and basic edge finishing requirements. Traditional once rounded and splay profile. Will radius hardwoods and softwood edgings, safe return design - ideal in kitchens, receptions and technical workplaces.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Twist Drill slow spiral V/Pt in HSS and TCT

    £4.59 – £45.88
    Twist Drills Slow Spiral for plastics, brass, chipboard and MDF DESCRIPTION The design of the slow spiral drills are better suited for use with the counterbore and countersink ranges as they help to prevent clogging. (over the faster helix versions.)
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Straight Single Flute Replacement TC Tip

    £81.05 – £110.10
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Straight with Flute Up/Down Shear Tooth TCT

    £59.65 – £79.52
    UP/DOWN SHEAR STAGGERED TOOTH TCT A fine finish may be achieved for trimming veneered and double-faced boards, plywoods and natural timbers using these up-down two flute cutters. DESCRIPTION A fine finish may be achieved for trimming veneered and double-faced boards, plywoods and natural timbers using these up-down two flute cutters.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Straight Single O Flute design For Low Melting Point Plastics STC

    £35.17 – £56.58
    SINGLE FLUTE SOLID CARBIDE For use on plastics, acrylics and light metals. The 'O' flute design reduces heat build up on low melting point materials. DESCRIPTION These straight single fluted plunging solid carbide router cutters are ideal for use on plastics, acrylics, foam, ABS, aluminium and magnesium . Please ensure that the shank is inserted fully into the collet, this helps reduce vibration which causes a reduction in the quality of finish and use the shortest cut lengths possible. The radius flute design gives effective cutting on ductile plastics, an ideal tool for cutting ABS components for example on 5 and 7 axis machines and offer efficient effective chip clearance with the for smooth feed rate that CNC's offer
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Countersink Shankless in silver steel and TCT

    £21.41 – £55.06
    Countersink Shankless SS For Pillar drilling machines only, not on portables.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Machine Counter Sink with 10mm shank with flat TCT

    £42.82
    TCT Machine Countersink & Bores A range of Countersinks and Counterbores. DESCRIPTION A range of Countersinks (part codes prefixed CS) and Counterbores (part codes prefixed CB). Both are 45mm Overall Length and have 10mm diameter Shanks with a flat on one side. Counterbores have length adjusting screw. Available in Left Hand (part codes suffixed LH) and Right Hand (part codes suffixed RH) rotation, and for drill hole diameters 3/16 inch (part codes containing -3/16) and 5mm (part codes containing -5). Please ensure correct variation is selected when ordering. Drills not included in price.
    Select options This product has multiple variants. The options may be chosen on the product page Details