66

  • Plug Hole Maker TCT

    £88.70£174.34
    TCT RPS Bevel Hole These bevel hole cutters are specially developed to bevel an existing hole or to make new bevelled holes. DESCRIPTION These bevel hole cutters are specially developed to bevel an existing hole or to make new bevelled holes. TTXC906-18 and TTXC906-23 bevel plug cutters can be used to make accurate plugs for the holes produced by the TTXC901 range of bevel hole cutters.
  • 2 to 9.5mm diameter straight 2 fluted Tungsten Carbide Tipped (TCT) router cutters made in our own factory in the UK. The cutters are made by the same craftsmen that make our world famous Industrial range of Cutters using a slightly diffreent grade of Tungsten Carbide Tip. The cutters still give a fantastic finish, great longevity of use and of course can be re-sharpened. A superb cutter at a very competitive price, try them we're sure you will love them.
  • 10 to 12.7mm diameter straight 2 fluted Tungsten Carbide Tipped (TCT) router cutters made in our own factory in the UK. The cutters are made by the same craftsmen that make our world famous Industrial range of Cutters using a slightly diffreent grade of Tungsten Carbide Tip. The cutters still give a fantastic finish, great longevity of use and of course can be re-sharpened. A superb cutter at a very competitive price, try them we're sure you will love them.
  • 14 to 30mm diameter straight 2 fluted Tungsten Carbide Tipped (TCT) router cutters made in our own factory in the UK. The cutters are made by the same craftsmen that make our world famous Industrial range of Cutters using a slightly diffreent grade of Tungsten Carbide Tip. The cutters still give a fantastic finish, great longevity of use and of course can be re-sharpened. A superb cutter at a very competitive price, try them we're sure you will love them.
  • Template Profilers with Shank Mounted Bearing 90 Degree TCT These double flute flush trim plunge router cutters are designed for use on template and pattern work, blind profiling and plunging i.e. internal aperture cut outs, and can be used in hand-held and table-mounted routers. They have a shank mounted bearing which will run along and follow the template which is attached to the workpiece with the end result being an exact duplicate of the template itself. DESCRIPTION TTPGC957-1/4, PGC9513-1/4 and PGC127127-1/4 cutters have a double bearing and an extended shank, overall length is 65mm, 71mm and 71mm respectively. TTTPGC12795 and TTTPGC12725 use TTB127 Bearing, TTTPGC1620 uses TTB16 Bearing. This range of Profile Guide Cutters are made with plunging facility/plunging centre points ideal for blind profiling and plunging. i.e. double skinned plywood.
  • V Groover TCT

    £35.17£133.04
    DESCRIPTION Ideal for veining work, freehand decor for panels and useful for character lining work on sign writing applications in solid timbers. The angle ( measurement A ) is measured from the horizontal. TTVGC45SF-1/2, TTVGC45SF-1/4, TTVGC45SF-12, TTVGC60SF-1/2, TTVGC60SF-1/4, TTVGC60SF-12, TTVGC60SF-8 cut to a point. TTVGCB45-1/4, TTVGCB60-127-1/4 have a shank mounted bearing.  
  • DESCRIPTION Supplied with 2 bearings, 12.7mm and 16mm in diameter, two shapes can produced with one cutter by changing the bearing size. The 16 mm diameter bearing removes the bottom quirk.  
  • TCT Bullnose Staff Bead A full bullnose radius for stair treads, nosings, window boards and edge mouldings Flats at top and bottom of the cutting edges create fillets on stock thicker than the nose diameter.
  • TCT Undercut Groovers 4 Wing M12*1 Internal Bore Groovers 4 wing and threaded M12*1.5mm bore which enable flush recessing. The arbor and bearings are sold separately and the TTUGA arbor is for use without a bearing only, the others can be used with or without a bearing provided the correct shims are used to bring it flush at the bottom. Arbor and bearings are separate items. All prices exclude VAT. All prices exclude VAT. DESCRIPTION TTUG10, TTUG15 and TTUG20 groover can be used for fitting fire proof strip. If no bearing is used, you can use the arbor TTUGA. If bearing is to be used, use the arbors TTUGALR for all groovers except TTUG20, which requires Arbor TTUGAXLR. The following list shows the Rebate Depth obtainable with each Bearing size for a 50mm diameter groover: B25=12.5mm, B26=12mm, B28=11mm, B30=10mm, B32=9mm, B34=8mm, B36=7mm, B37=6.5mm, B42=4mm.
  • Classic Cove TCT

    £67.28£96.34
    TCT Classical Perfect for drawer fronts in solid material for enhancing the style and appearance of panelled work.
  • Profile Edge Mould Classic Decor TCT Bearing Guided This classic shape is a fine cutter for reproduction furniture, bolection mould and any work in which the natural finish and beauty of wood is to be enhanced.
  • Downturn Rebate Cutter Has many cutting and grooving uses in decorative and repair work. Particularly suitable for bowl replacement. Lower illustration shows method of removing bowl from worktop. DESCRIPTION To produce a 13mm rebate for the downturns on solid surface worktops. Fitted with a plastic sleeved bearing TTPB127.
  • Rounding Over Pin Guided TCT

    £53.52£88.70
    TCT Rounding Over With Guide Pin Available in fractional sizes to relieve corners on small panels, or larger radii for stair nosings, window boards and many shelf and display units. DESCRIPTION. Careful feeding will prevent the pin from marking workpiece. Pin diameter 8.9mm by 6.1mm long
  • British made TCT self guided corner bead cutter with two flutes for a cleaner finish. Ideal for making beautifull edge moulds for decorative finishes etc. Full corner beads can be made by making a second pass at 90 degrees.
  • British made two flute TCT top bearing guided profile flush trimming cutters. Gives a superb clean finish on timber, veneers and plastic laminate. The top bearing is for following a pattern or template to give a superb finish when replicating components.
  • Hinge Recessor

    £32.11£36.70
    HINGE AND FIRE STRIP RECESSER TCT A cutter ideal for hinge recessing and the underside of handrails, these have extra long shanks for use with the popular hinge jigs on the market
  • TCT Rounding Over A unique cutter designed for short skirting production, or for relieving a square section.
  • British made TCT Trade cutters for Aquamac and Intumescent Strips. Use E207HTC for Aquamac 21, E206HTC for Aquamac 63.

Title