12

Waterfall Profile Bearing Guided TCT

£91.76 – £94.81

TCT Double Flute Helps to reduce the effect of overlay joint line. DESCRIPTION Sometimes called 'waterfall effect' giving a non-drip edge to a worktop. TTXC214 has a shorter cut length, ideal for use on 12.5mm thick material. TTXC216 is fitted with self-guided Bearing for use with 15mm thick material. TTXC221 is ideal for use on 19mm (3/4 inch) thick material.

Select options Details
Water Channel, Capillary, Sash Bar & Leading Edge TCT

£64.23 – £233.98

TCT Capillary Water Channel Groove All cutters in this range are non plunging but with bottom cutting action. DESCRIPTION This is designed to place a capillary groove on sill sections when used on site in a portable machine.

Select options Details
Ventilation Slot TCT

£79.51 – £87.17

TCT Two Flute Ventilation Slot Slots and produces a radius on the upper edge in one pass.

Select options Details
V Grooving Radiused TCT

£55.06 – £70.35

Radiused 'V' Grooving TCT Ideal for panel and veining work, lettering, engraving, sign making, fluting, decorative trimming and barley twist. DESCRIPTION These do not cut to a point and will leave a 1mm - 2mm flat at the bottom of the groove.

Select options Details
V Groover TCT

£35.17 – £133.04

DESCRIPTION Ideal for veining work, freehand decor for panels and useful for character lining work on sign writing applications in solid timbers. The angle ( measurement A ) is measured from the horizontal. TTVGC45SF-1/2, TTVGC45SF-1/4, TTVGC45SF-12, TTVGC60SF-1/2, TTVGC60SF-1/4, TTVGC60SF-12, TTVGC60SF-8 cut to a point. TTVGCB45-1/4, TTVGCB60-127-1/4 have a shank mounted bearing.

Select options Details
V Groove Folding Tool

£45.88 – £93.28

TCT Two Flute Grooving Soft Form Single flute TCT and RT versions available.

Select options Details
Twist Drill slow spiral V/Pt in HSS and TCT

£4.59 – £45.88

Twist Drills Slow Spiral for plastics, brass, chipboard and MDF DESCRIPTION The design of the slow spiral drills are better suited for use with the counterbore and countersink ranges as they help to prevent clogging. (over the faster helix versions.)

Select options Details
Torus Mould Profiles TCT

£119.28 – £143.75

TCT Multi-Mould DESCRIPTION TTTOR25 gives an ornate moulding used in full or in part. TTTOR22 is a possible picture rail and cover mould cutter. TTTOR27 ideal to use the complete mould or part for short production runs. Excellent cutter to produce ornate skirting and architrave moulding. TTTOR-B gives a deep cavetto effect with a bead to break up the line of the mould. The fine lines of this cutter make it an excellent choice for matching skirting and architrave. TTTOR-C is a variation of the Torus Mould (TTTOR-T).

Select options Details
Tongue and Groove TCT

£125.40

TCT Double Flute These cutters are designed to produce top surface perfect butt joints. Suitable for materials 6mm (15/64 inch) to 17mm (43/64 inch) thick.

Select options Details
Template profiler with shank mounted bearing TCT

£38.23 – £93.28

These router cutters are designed for use on template and pattern work, blind profiling and plunging They have a shank mounted bearing which will run along and follow the template which is attached to the work piece with the end result being an exact duplicate of the template itself.

Select options Details
Template profiler with shank mounted bearing Replacement TC Tip

£71.23 – £87.79

A particular advantage to this replacement tip style over the conventional brazed variety is that the diameter remains constant. These double and single flute style flush trim router cutters are designed for use on template and pattern work and can be used in hand-held and table-mounted routers. They have a shank mounted bearing which will run along and follow the template which is attached to the workpiece with the end result being an exact duplicate of the template itself. The L209-OH tip has one cutting edge and is non reversible, the others are reversible. Tips are sold in boxes on 10.

Select options Details
Tapered Repair Cutter TCT

£56.54 – £64.37

Tapered Repair Cutter Designed specifically to repair small imperfections in solid surface material.

Select options Details
T Slot TCT & PCD

£50.47 – £300.00

TCT T-Slot Square Edged Designed for creating the T-slot in wall panels used in the point of sale industry for shelving and display purposes.

Select options Details
Surface Spoilboard Planer TCT

£120.82 – £126.92

TCT Spoilboard For trimming bowls, trepanning and face milling. Ideal for removing flashing and large surface areas of raised draining board channels.

Select options Details
Surface Spoilboard Planer Replacement TC Tip

£184.44 – £349.00

Ideal for skimming on CNC routing machines. Tips are reversible and are sold in boxes of 10.

Select options Details
Surface Spoil board Planer TCT

£36.70 – £94.10

SPOILBOARD SURFACE PLANER 2 & 3 WING TCT For trimming aluminium flashing. DESCRIPTION TTSMC20 has a shear action for finer finish.

Select options Details
Sunk Bead Decorative TCT

£93.28 – £96.34

This range of bead cutters produce mouldings to highlight features such as fascia rails, chair backs or decorative sections 'planted' on bedroom furniture to bring a line and feature to a continuous layout. TTDSB4 is a sunken flute cutter with a shallow radius to produce a soft effect. An ideal cutter to produce fluted pillars, for fire surrounds and 'gable ends' on bedroom furniture. Useful cutter to cut on a glue joint to hide the glue line. TTDSB5 is a sunk bead mould perfect for finishing wall unit facias and cover moulds on window sections. TTDSB7 is ideal for fluting or decorating solid surrounds.

Select options Details
Sunk Bead Bearing Guided TCT

£84.11 – £113.17

Used to create a fluting effect on the edge of furniture. TTRWHC range are used to create a fluting effect on the edge of furniture. TTSBCB range has a removeable bearing system. When requiring a self guiding effect ensure the jig has clearance between workpiece and bottom of cutter. TTHHC20 and TTRHHC20 complement each other and when used together perform the cuts needed to form a drop leaf table joint. Please note some of these products are Made To Order.

Select options Details
Sunk Bead

£85.64 – £96.34

These cutters can be used as matched sets of flute and beads or as individual sunk bead and reads. TTDSB8, TTDSB9 and TTDSB10 are suitable for moulding table surrounds and capillary drip grooves for window surrounds. TTRDSB8, TTRDSB9 and TTRDSB10 are matched to the TTDSB8, TTDSB9 and TTDSB10 range for the production of strip planking.

Select options Details
Straight with Flute Up/Down Shear Tooth TCT

£59.65 – £79.52

UP/DOWN SHEAR STAGGERED TOOTH TCT A fine finish may be achieved for trimming veneered and double-faced boards, plywoods and natural timbers using these up-down two flute cutters. DESCRIPTION A fine finish may be achieved for trimming veneered and double-faced boards, plywoods and natural timbers using these up-down two flute cutters.

Select options Details
Straight Single Flute TCT

£33.64 – £38.23

TCT Single Flute A high performance, single flute, cutter for extra clearance when cutting apertures and shaping work. The single flute gives a stronger backing support to the cutting edge.

Select options Details
Straight Single Flute Replacement TC Tip

£81.05 – £110.10

Select options Details
Straight Single and Double Fluted TCT

£24.47 – £111.64

DESCRIPTION A comprehensive range of straight fluted router cutters with diameters from 1.5mm to 50.8mm with parallel and internally threaded shank configurations. There are some left hand rotational cutters in this range. Part numbers starting with TTWLC are for use in inlay work and have a chisel point end. TTPH do not plunge.

Select options Details
Straight Replacement Non Plunging TC Tip

£129.98 – £134.58

These cutter are double flute and they are non plunging with an outside fixing style for the use of profiling, the tips have 4 cutting edges so they can also be ramped down into workpiece. Tips are reversible and are sold in boxes of 10

Select options Details
Straight for acrylic cutting STC

£36.41 – £99.40

STRAIGHT FLUTED SOLID CARBIDE For use on plastics, acrylics, composites and light metals . DESCRIPTION These straight double fluted plunging solid carbide router cutters are ideal for use on plastics, acrylics, foam ABS, aluminium and magnesium . Please ensure that the shank is inserted fully into the collet, this helps reduce vibration which causes a reduction in the quality of finish.

Select options Details
Straight Double Flute Downard Sheared Cut TCT

£44.36 – £55.06

TCT Double Flute Shear action downcut to reduce breakout for longer life and improved performance. Pushes waste material away from the operator.

Select options Details
Straight 2 Flute Replacement TC Tip

£136.11 – £256.93

Select options Details
Step Down

£73.41

TCT Double Flute For creating a 'step down' shadow line between bowl and sheet.

Select options Details
Stair Nosing TCT

£61.48 – £104.51

TCT Stair Nosing This range have a flatter style to a standard full bull nose offering an alternative profile on stair treads, window boards and these can also be used to relieve sharp corners on the standard board thickness. DESCRIPTION The TTSNCB10 has a bottom bearing.

Select options Details
Staff Bead – Full Bullnose TCT

£77.99 – £140.68

TCT Bullnose Staff Bead A full bullnose radius for stair treads, nosings, window boards and edge mouldings Flats at top and bottom of the cutting edges create fillets on stock thicker than the nose diameter.

Select options Details
Splay and Once Rounded – Shark Nose TCT

£92.22 – £122.34

TCT Shark Nose Designed to finish off worktops, table tops and basic edge finishing requirements. Traditional once rounded and splay profile. Will radius hardwoods and softwood edgings, safe return design - ideal in kitchens, receptions and technical workplaces.

Select options Details
Spiral compression fluted router cutter for nesting STC

£39.76 – £88.00

With an up and downard cutting action on the one tool, the fluted compression style allows for fine finish on the top and bottom edges of the board. NEG code denotes downward cutting action, POS code denotes upward cutting action, For use with CNC machines.

Select options Details
Spiral 3 flute with chipbreakers for general use on wood based materials STC

£43.00 – £435.85

With either an up or downward cutting action the chipbreaker design allows for faster feed rates where end finish is less important. NEG code denotes downward cutting action, POS code denotes upward cutting action, For use with CNC machines.

Select options Details
Spiral 3 flute router cutter for general use on wood based materials STC

£40.00 – £270.00

With either an up or downward cutting action. NEG code denotes downward cutting action, POS code denotes upward cutting action, For use with CNC machines.

Select options Details
Spiral 2 flute router cutter for general use on wood based materials STC

£38.23 – £420.56

With either an up or downward cutting action. NEG code denotes downward cutting action, POS code denotes upward cutting action, For use with CNC machines.

Select options Details
Spiral 1 flute router cutter for general use on wood based materials STC

£15.00 – £75.00

With either an up or downward cutting action. NEG code denotes downward cutting action, POS code denotes upward cutting action, For use with CNC machines.

Select options Details

Title