18000

Bevel and Chamfer Light Duty Replacement TC Tip

£91.76

Angles are measured from the horizontal. Tips are reversible and are sold in boxes of 10.

Select options Details
V Groover and Tracery Replacement TC Tip

£269.16 – £319.63

This range of single flute replacement tip cutters are used to produce chamfers and V grooves on softwood, hardwood, MDF and other manmade materials. The design and the specially ground tip produce a perfect V in the bottom of the groove. The TC tips are non reversible and are sold singularly.

Select options Details
Perfect V Engraving Replacement TC Tip

£86.43 – £99.40

This range of single flute RT cutters are used to produce chamfers and are ideal for V grooves on softwood, hardwood, MDF and other manmade materials. The design and the specially ground tip produce a perfect V in the bottom of the groove. Angles are measured from the vertical, i.e. a TTVGC60SFRT-1/2 has an inclusive angle of 120 degrees on the tool. Cutters come complete with one tip already installed, the L308 tips are reversible the others are non reversble. Tips are sold in boxes of 10.

Select options Details
Perfect V Engraving Small Diameter Replacement TC Tip

£73.88 – £87.31

This range of single flute RT cutters are used to produce chamfers and V grooves on softwood, hardwood, MDF and other manmade materials. The design in allows a perfect V in the bottom of the groove. The tips are reversible and sold in boxes of 10.

Select options Details
Surface Spoilboard Planer Replacement TC Tip

£184.44 – £349.00

Ideal for skimming on CNC routing machines. Tips are reversible and are sold in boxes of 10.

Select options Details
Bevel Plug/Bevel Hole Set TCT

£1,108.69

7 PIECE TCT RPS Cutter Set 1/2 Shanks Specially made tooling for repair of 'wrongly made' holes and also for decorative effects using plugs in other colours. This set includes all the TTXC901 and TTXC906 cutters. DESCRIPTION Use the Titman Plug system for a perfect repair. Specially made tooling for repair of 'wrongly made' holes and also for decorative effects using plugs in other colours. This set includes all the TTXC901 and TTXC906 cutters.

Select options Details
Plug Maker Tapered TCT

£146.81 – £255.40

TCT RPS Bevel Hole These bevel hole cutters are specially developed to bevel an existing hole or to make new bevelled holes. DESCRIPTION These bevel hole cutters are specially developed to bevel an existing hole or to make new bevelled holes. TTXC906-18 and TTXC906-23 bevel plug cutters can be used to make accurate plugs for the holes produced by the TTXC901 range of bevel hole cutters.

Select options Details
Plug Hole Maker TCT

£88.70 – £174.34

TCT RPS Bevel Hole These bevel hole cutters are specially developed to bevel an existing hole or to make new bevelled holes. DESCRIPTION These bevel hole cutters are specially developed to bevel an existing hole or to make new bevelled holes. TTXC906-18 and TTXC906-23 bevel plug cutters can be used to make accurate plugs for the holes produced by the TTXC901 range of bevel hole cutters.

Select options Details
Cove Mould Bearing Guided TCT

£93.28

TCT Two Flute Cove Mould With Bearing Two flute half round cutter. Ideal for a scalloped edge finish. For all types of decorative edge profiling.

Select options Details
Raised Panel Bevel Bearing Guided TCT

£105.53 – £120.82

TCT Double Flute TTXC611 is the perfect cutter for panel raising work. TTXC616 is designed for large 45 degree chamfer work with guide Bearing.

Select options Details
V Groove Folding Tool

£45.88 – £93.28

TCT Two Flute Grooving Soft Form Single flute TCT and RT versions available.

Select options Details
Tongue and Groove TCT

£125.40

TCT Double Flute These cutters are designed to produce top surface perfect butt joints. Suitable for materials 6mm (15/64 inch) to 17mm (43/64 inch) thick.

Select options Details
Inlay Rebater TCT

£70.35 – £88.70

Produces a slot to take inlays of a different col0ur to produce a line effect joint

Select options Details
Rounding Over Bearing Guided TCT

£78.00 – £149.87

TCT Double Flute Fitted with self-guiding Bearing for rounding over. See cutters TTXC301 and TTXC321 for complete rounding over.

Select options Details
Non Drip TCT

£87.17

TCT Double Flute This cutter produces a 'waterfall' effect on a worktop. Can be used against a wall for splashback.

Select options Details
Waterfall Profile Bearing Guided TCT

£91.76 – £94.81

TCT Double Flute Helps to reduce the effect of overlay joint line. DESCRIPTION Sometimes called 'waterfall effect' giving a non-drip edge to a worktop. TTXC214 has a shorter cut length, ideal for use on 12.5mm thick material. TTXC216 is fitted with self-guided Bearing for use with 15mm thick material. TTXC221 is ideal for use on 19mm (3/4 inch) thick material.

Select options Details
Overlay Trimmer Bearing Guided TCT

£120.07 – £154.46

TCT Double Flute For edging sinks and vanity bowls. The special taper on the Bearing sleeve allows for perfect guide following around the inside of the bowl.

Select options Details
Overlay Trimmer Bearing Guided TCT

£87.17 – £91.76

TCT Double Flute For edging sinks and vanity bowls. The special taper on the Bearing sleeve allows for perfect guide following around the inside of the bowl.

Select options Details
Reverse Bevel

£87.17

TCT Double Flute For bevelling inside bowl tops and similar applications. Avoids need to turn workpiece.

Select options Details
Bevel Matching Bearing Guided TCT

£108.58

TCT RPS Bevel Hole These bevel hole cutters are specially developed to bevel an existing hole or to make new bevelled holes. DESCRIPTION These bevel hole cutters are specially developed to bevel an existing hole or to make new bevelled holes. TTXC906-18 and TTXC906-23 bevel plug cutters can be used to make accurate plugs for the holes produced by the TTXC901 range of bevel hole cutters.

Select options Details

Title