Facebook

Right Hand

  •

    Reverse Bevel

    £87.17
    TCT Double Flute For bevelling inside bowl tops and similar applications. Avoids need to turn workpiece.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Straight Single Flute Replacement TC Tip

    £81.05 – £110.10
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Straight 2 Flute Replacement TC Tip

    £136.11 – £256.93
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Straight Replacement Non Plunging TC Tip

    £129.98 – £134.58
    These cutter are double flute and they are non plunging with an outside fixing style for the use of profiling, the tips have 4 cutting edges so they can also be ramped down into workpiece. Tips are reversible and are sold in boxes of 10
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Template profiler with shank mounted bearing Replacement TC Tip

    £71.23 – £87.79
    A particular advantage to this replacement tip style over the conventional brazed variety is that the diameter remains constant. These double and single flute style flush trim router cutters are designed for use on template and pattern work and can be used in hand-held and table-mounted routers. They have a shank mounted bearing which will run along and follow the template which is attached to the workpiece with the end result being an exact duplicate of the template itself. The L209-OH tip has one cutting edge and is non reversible, the others are reversible. Tips are sold in boxes on 10.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Flush Trim bearing guided 90 Degree Replacement TC Tip

    £55.06 – £162.46
    This range are ideal for use on wood, plywood, MDF and other wood composites, plastics, and solid surface materials. Widely used for copy profiling and flush trimming, the replaceable tip design provides a constant diameter and the flexibility of instant tip changes whilst onsite. The L209-OH tip has one cutting edge and is non reversible, the others are reversible. Tips are sold in boxes on 10.  
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Flush Trim Middle Bearing Guided Replacement TC Tip

    £137.02 – £156.00
    A unique cutter that will trim the top and bottom edges of a panel simultaneously, the centrally mounted bearing follows the profile. Tips are reversible and are sold in boxes of 10.    
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Surface Spoilboard Planer Replacement TC Tip

    £184.44 – £349.00
    Ideal for skimming on CNC routing machines. Tips are reversible and are sold in boxes of 10.  
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Perfect V Engraving Small Diameter Replacement TC Tip

    £73.88 – £87.31
    This range of single flute RT cutters are used to produce chamfers and V grooves on softwood, hardwood, MDF and other manmade materials. The design in allows a perfect V in the bottom of the groove. The tips are reversible and sold in boxes of 10.  
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Perfect V Engraving Replacement TC Tip

    £86.43 – £99.40
    This range of single flute RT cutters are used to produce chamfers and are ideal for V grooves on softwood, hardwood, MDF and other manmade materials. The design and the specially ground tip produce a perfect V in the bottom of the groove. Angles are measured from the vertical, i.e. a TTVGC60SFRT-1/2 has an inclusive angle of 120 degrees on the tool. Cutters come complete with one tip already installed, the L308 tips are reversible the others are non reversble. Tips are sold in boxes of 10.  
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • V Groover and Tracery Replacement TC Tip

    £269.16 – £319.63
    This range of single flute replacement tip cutters are used to produce chamfers and V grooves on softwood, hardwood, MDF and other manmade materials. The design and the specially ground tip produce a perfect V in the bottom of the groove. The TC tips are non reversible and are sold singularly.  
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Bevel and Chamfer Bearing Guided Replacement TC Tip

    £96.34
    Tips are reversible and are sold in boxes of 10.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Bevel and Chamfer Light Duty Replacement TC Tip

    £91.76
    Angles are measured from the horizontal. Tips are reversible and are sold in boxes of 10.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Bevel and Chamfer Replacement TC Tip

    £167.91 – £256.92
    This tool does not plunge. Tips are reversible and are sold in boxes of 10
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Dowel Drills 57mm O/All Lip & Spur with 10mm shank with flat TCT

    £27.36 – £48.93
    A range of lip and spur boring bits with 10mm diameter shanks that have a flat on one side and length adjusting screw in the end. Available with right hand or left hand rotation.  
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Dowel Drills 57mm O/All ‘V’ Point with 10mm shank with flat TCT

    £29.05 – £36.70
    A range of 60 degree inclusive V Point drills with 10mm diameter shanks that have a flat on one side and length adjusting screw in the end. Available with right hand or left hand rotation.  
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Dowel Drills 58mm O/All with 45 Deg chamfer on tip ends with 8mm shank + flat TCT

    £25.52 – £29.05
    A range drills with a 1mm long 45 degree chamfer on the tip edge for use in the specialized boring machine MAFELL DuoDübler . Shanks are 8mm diameter with  a flat on one side and length adjusting screw in the end. Available with right hand.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Dowel Drills 57mm and 67mm O/All Lip & Spur with 8mm parallel shank TCT

    £30.59 – £38.23
    A range lip and spur  drills with 8mm diameter parallel shanks that have an end adjusting ting screw. Available with right hand or left hand rotation.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Dowel Drills 70mm O/All Lip & Spur with 10mm shank with flat TCT

    £29.05 – £38.23
    A range of lip and spur boring bits with 10mm diameter shanks that have a flat on one side and length adjusting screw in the end. Available with right hand or left hand rotation.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Dowel Drills 70mm O/All ‘V’ Point with 10mm shank with flat TCT

    £29.05 – £38.23
    A range of 60 degree inclusive V Point drills with 10mm diameter shanks that have a flat on one side and length adjusting screw in the end. Available with right hand or left hand rotation.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Dowel Drills 75mm O/All Lip & Spur with 10mm shank with flat TCT

    £14.75
    A range of lip and spur boring bits with 10mm diameter shanks that have a flat on one side and length adjusting screw in the end. Available with right hand or left hand rotation.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Rebate Bearing Guided Replacement TC Tip

    £93.28 – £136.11
    A range of rebate cutters bearing guided, bearings can be changed to a different diameter to produce various rebate depths. The TTRCB95-1/2RT and TTRCB95-8RT  are fitted with the TT3/8-B37514 bearing and also come with the TT1/2-B127,  TTB15 and TTB19 bearings. The TTRCb9512RT is fitted with 2 - TT1/2-B127 bearings and can then be used in conjunction with the TTRR range of aluminium sleeves to produce the various rebate depths. These rings are placed in the middle of the 2 bearings which then keep them secure whilst routing. If you take the diameter dimension of the cutter minus the diameter dimension of the ring and divide by 2 this will give you the rebate depth. Tips are reversible and are sold in boxes of 10
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Straight Single and Double Fluted TCT

    £24.47 – £111.64
    DESCRIPTION A comprehensive range of straight fluted router cutters with diameters from 1.5mm to 50.8mm with parallel and internally threaded shank configurations. There are some left hand rotational cutters in this range. Part numbers starting with TTWLC are for use in inlay work and have a chisel point end. TTPH do not plunge.        
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Straight Pocket Hole Long Reach TCT

    £32.11 – £70.35
    DESCRIPTION Special relief on the cutter body allows for deep slotting work. Suitable for plunging. Note:LH58L, LH58L2, LH34L, not to be used in a portable router.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Template profiler with shank mounted bearing TCT

    £38.23 – £93.28
    These router cutters are designed for use on template and pattern work, blind profiling and plunging They have a shank mounted bearing which will run along and follow the template which is attached to the work piece with the end result being an exact duplicate of the template itself.  
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Flush Trim Bearing Guided 2 & 3 Flute 90 Degree TCT

    £27.53 – £120.07
    Widely used for copy profiling and flush trimming . Aluminium cutting reference numbers TTSIBGT90LK-1/2 , TTSIBGT90LK-1/4 Downward shear cutter action reference numbers TTBGT90LKS-1/2, TTBGT90LKS-1/4, TTBGT90LKS-12, TTBGT90LKS-6, TTBGT90LKS-8, TTBGT90S-1/4, TTBGT90S-6, TTBGT90S-8, cutters have a downward shear cutting action. Top and Bottom bearing guided reference numbers TBGT90LK1DB-1/2, TTBGT90LK2DB-1/2, TTBGT90LK2DB-12, TTBGT90LK2DB-4-1/2, TTBGT90LKDB-1/2, TTBGT90LKDB-8 TTBGT90LKSLP-1/4, TTBGT90SLP-1/4 have a low profile end screw for restrictive access applications. Oversize bearing cutters reference numbers TTIBGT63LK-B375-1/4, TIBGT63LK-B375-6 have an oversize bottom bearing for overhang trimming. TTSET1214-1/4 has a solid end bearing for heavy duty work.    
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • V Groover TCT

    £35.17 – £133.04
    DESCRIPTION Ideal for veining work, freehand decor for panels and useful for character lining work on sign writing applications in solid timbers. The angle ( measurement A ) is measured from the horizontal. TTVGC45SF-1/2, TTVGC45SF-1/4, TTVGC45SF-12, TTVGC60SF-1/2, TTVGC60SF-1/4, TTVGC60SF-12, TTVGC60SF-8 cut to a point. TTVGCB45-1/4, TTVGCB60-127-1/4 have a shank mounted bearing.  
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Bevel & Chamfer TCT

    £71.87 – £186.58
    TCT Bevelled A range of various angles of beveled cutters designed to chamfer sections of timber, chipboard and MDF. DESCRIPTION The cutters with reference TTBCF have a tungsten carbide plunging centre tip The cutters with reference TTBC are for profiling only and do not plunge. Angles are measured from the vertical
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Bevel & Chamfer Bearing Guided TCT

    £43.93 – £165.17
    TCT Bevelled With Bottom Bearing A range of bevelled chamfer cutters with bottom guide bearing for large sections of timber, chipboard and MDF.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Chamfer With Guide Pin TCT

    £50.47 – £53.52
    TCT Chamfer With Guide Pin A range of 45 and 30 degree chamfer cutters designed with a fixed small diameter guide pin. DESCRIPTION Useful for internal work where the small diameter pin enables right angle corners to be included. Popular in the sign making industry as they can chamfer the edges of plastic materials .
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Ovolo TCT

    £44.36 – £192.70
    TCT Ovolo Used in conjunction with a side fence, most ovolo and rounding over operations can be produced with this extensive range. These cutters have plunging facility.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Rounding Over Bearing Guided TCT

    £38.23 – £207.99
    DESCRIPTION Supplied with 2 bearings, 12.7mm and 16mm in diameter, two shapes can produced with one cutter by changing the bearing size. The 16 mm diameter bearing removes the bottom quirk.  
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Corner Ovolo TCT

    £73.41 – £114.70
    TCT Corner Ovolo Profiles and moulds in one operation. Ideal for aperture cutting, ie snooker table pockets, worktops and cover mouldings. DESCRIPTION WCO Type have plunge facility. WCOB Type have bearing.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Corner Bead Bearing Guided TCT

    £68.81 – £110.10
    These cutters are the perfect solution to finishing cladding and corners on pillar covering or for enhancing square table legs or returns on wall unit furniture. The diameter of the bead is twice the value of the radius i.e. R=2mm the bead diameter is 4mm.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Radius Cove TCT

    £30.59 – £133.04
    DESCRIPTION A comprehensive range of Core Box, Cove, Radius, Guttering cutters with radii from 1.6mm to 25.4mm. Cutters with part number starting TTCBB have a shank mounted bearing fitted.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Radius Cove Pin or Bearing Guided TCT

    £45.87 – £120.82
    TCT Cove Mould Bearing Guided Producing a quarter round on the edge of the workpiece these are ideal for detailing casework, doors and drawers, posts and columns. The cove also makes up one-half of the rule joint used on drop-leaf tables. DESCRIPTION These cutters come complete with TTB127 and TTB16 bearings. Matching rounding over cutters available for rule joints.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Rebate Pin or Bearing Guided TCT

    £50.98 – £128.46
    REBATER WITH REPLACEMENT TC TIPS Replacement Tip Rebate 4 Wing With Bearing DESCRIPTION Replacement Tip Rebate 4 Wing With Bearing Z=Number of flutes. RPM=Maximum revolutions per minute
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Finger Pull TCT

    £129.98 – £149.86
    CT Finger Pull Grip Square Bottom For solid handles and pulls on kitchen and wall unit doors, the perfect solutions for providing positive grips and softened, easy-on-the-fingers edges without the need for external hardware. DESCRIPTION TTFPC22 is a variation of TTFPC19 giving a square bottom and undercut. Both of these have a centre tip for plunging
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Dovetail TCT

    £33.64 – £74.94
    TCT Dovetail Standard sizes for all dovetail and sliding dovetail applications ie slot dovetail, hidden dovetail, etc. DESCRIPTION Available with scribers on TTDCS14.3-8 & TTDCS127-1/4 to enable use in conjunction with portable routing jigs. Parts TTADC12B-1/4, TTBDC14B-1/4 have shank mounted bearings fitted.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Chamfer and Radius Sets bearing guided for Top and Bottom Profiling TCT

    £91.76 – £133.04
    TCT Adjustable Top and Bottom Chamfer with Bearing DESCRIPTION For bevelling and trimming the top and bottom edges of the workpiece. Adjust the four wing trimmer blocks with spacers for differing widths of material. Maximum material thickness 15mm for the DCB16 and is fixed Maximum material thickness 32mm, minimum material thickness 16mm for the BCS38. Maximum material thickness 36mm, minimum material thickness 19mm for the BGAC45. To extend the life of cutting edges use 26mm bearing.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Chamfer and Combination Trimmer TCT

    £30.58 – £42.82
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Spiral compression fluted router cutter for nesting STC

    £39.76 – £101.19
    With an up and downard cutting action on the one tool, the fluted compression style allows for fine finish on the top and bottom edges of the board. NEG code denotes downward cutting action, POS code denotes upward cutting action, For use with CNC machines.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Spiral 1 flute router cutter for general use on wood based materials STC

    £15.00 – £75.00
    With either an up or downward cutting action. NEG code denotes downward cutting action, POS code denotes upward cutting action, For use with CNC machines.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Spiral 2 flute router cutter for general use on wood based materials STC

    £38.23 – £420.56
    With either an up or downward cutting action. NEG code denotes downward cutting action, POS code denotes upward cutting action, For use with CNC machines.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Spiral 3 flute router cutter for general use on wood based materials STC

    £40.00 – £270.00
    With either an up or downward cutting action. NEG code denotes downward cutting action, POS code denotes upward cutting action, For use with CNC machines.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Spiral 3 flute with chipbreakers for general use on wood based materials STC

    £43.00 – £435.85
    With either an up or downward cutting action the chipbreaker design allows for faster feed rates where end finish is less important. NEG code denotes downward cutting action, POS code denotes upward cutting action, For use with CNC machines.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Spiral 3 flute hogging router cutter for general use on wood based materials STC

    £109.43
    With either an up or downward cutting action the rougher / hogging design allows for faster feed rates where end finish is less important. NEG code denotes downward cutting action, POS code denotes upward cutting action,, For use with CNC machines.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Dowel Drills 77mm O/All Lip & Spur with 10mm shank with flat TCT

    £35.17 – £44.36
    A range of lip and spur boring bits with 10mm diameter shanks that have a flat on one side and length adjusting screw in the end. Available with right hand or left hand rotation.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Dowel Drills 77mm O/All ‘V’ Point with 10mm shank with flat TCT

    £35.17 – £44.36
    A range of 60 degree inclusive V Point drills with 10mm diameter shanks that have a flat on one side and length adjusting screw in the end. Available with right hand or left hand rotation.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Dowel Drills 85mm O/All Lip & Spur with 10mm shank with flat TCT

    £33.49 – £42.24
    A range of lip and spur boring bits with 10mm diameter shanks that have a flat on one side and length adjusting screw in the end. Available with right hand or left hand rotation.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Dowel Drills 105mm O/All Lip & Spur with 10mm shank with flat TCT

    £40.58
    A range of lip and spur boring bits with 10mm diameter shanks that have a flat on one side and length adjusting screw in the end. Available with right hand or left hand rotation.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Flush Trim Middle Bearing Guided TCT

    £74.94
    MIDDLE BEARING GUIDED TOP & BOTTOM FLUSH TRIM 90 DEG TCT & RT This double flute cutter trims the top and bottom edges simultaneously as bearing follows the profile in the centre of the material. These industrial quality premium grade tungsten carbide flush trimmers are ideal for wood, plywood, MDF and other wood composites, plastics, and solid surface materials DESCRIPTION Unique in that this cutter will trim the top and bottom edges of a panel simultaneously, whilst the centrally mounted bearing follows the profile.
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • Placeholder

    Stair Housing Replacement TC Tip

    £106.92 – £121.73
    Ffor the popular sizes of stair treads for use in conjunction with CNC and trenching machines, cutters are offered in both left and right hand rotation. Tips are reversible and are sold in boxes of 10
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • T Slot TCT & PCD

    £50.47 – £300.00
    TCT T-Slot Square Edged Designed for creating the T-slot in wall panels used in the point of sale industry for shelving and display purposes.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Staff Bead – Full Bullnose TCT

    £77.99 – £140.68
    TCT Bullnose Staff Bead A full bullnose radius for stair treads, nosings, window boards and edge mouldings Flats at top and bottom of the cutting edges create fillets on stock thicker than the nose diameter.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Edge Bead Heavy Duty TCT

    £97.88 – £110.10
    TCT Moulding Edge Bead Heavy Duty A range of dual purpose edge moulding cutters designed to finish work tops and edges with a single bead mould or a full bullnose on the edge of material between 4mm to 12mm in thickness.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Hand Bead TCT

    £88.70 – £142.22
    TCT Edge Moulding Shallow Bead A shallow radius style bull nose cutter ideal for a hand hold which is able to plunge into the centre of a board. Designed to finish solid edged worktops for kitchens or display work areas. These have a shallow radius DESCRIPTION The shallow arc is ideal for a hand hold shape rather than a full 180-degree round over, this also has short flats above and below the cutter arc which can produce a small quirk effect for an edge mould for example
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Fire Strip Slotter TCT

    £61.97 – £114.70
    TCT Groover Consists of Groover, Bearing and Arbor. Can be supplied for 10, 15 and 20mm strip. DESCRIPTION Consists of Groover, Bearing and Arbor. Can be supplied for 10, 15, 20 and 25mm strip. For slotting doors with a portable routing machine, using a Guide Bearing to give the correct cutting depth of 4mm. Suits Therma Seal Intumescent Strip.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Classic Cove TCT

    £67.28 – £96.34
    TCT Classical Perfect for drawer fronts in solid material for enhancing the style and appearance of panelled work.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Classic Decorative Edge Mould Bearing Guided TCT

    £60.25 – £131.52
    Profile Edge Mould Classic Decor TCT Bearing Guided This classic shape is a fine cutter for reproduction furniture, bolection mould and any work in which the natural finish and beauty of wood is to be enhanced.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Lambs Tongue Bearing Guided TCT

    £60.25 – £114.35
    Profile Edge Mould Classic Lambs Tongue TCT Bearing Guided Classic Lambs Tongue mould perfect for finishing table and furniture tops. DESCRIPTION These cutters are supplied with a 9.5mm diameter bearing and a 12.7mm diameter bearing.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Folding Tool TCT

    £50.47 – £55.58
    ACM FOLDING AND SCORING TCT These cutters are specially deigned for routing aluminium composite material. Used to rout V-grooves of 90 degree, 108 degree or 135 degree inclusive into the centre of the material for the folding the ACM into a 90 degree, 72 degree or 45 degree corner, this procedure will allow easy foldinging of the material preventing the cracking in the intended folded area.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Downturn Rebate Cutter TCT

    £73.59
    Downturn Rebate Cutter Has many cutting and grooving uses in decorative and repair work. Particularly suitable for bowl replacement. Lower illustration shows method of removing bowl from worktop. DESCRIPTION To produce a 13mm rebate for the downturns on solid surface worktops. Fitted with a plastic sleeved bearing TTPB127.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Grecian Ogee Mould TCT

    £134.58
    TCT Raised Panel Grecian Ogee Ideal for heavy cornice and dado rail production. Used in restoration and as a classic mould for picture frames, to produce raised panels on drawer fronts and doors.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Barley Twist TCT

    £122.34
    Barley Twist TCT A range of cutters which are ideal for producing barley twist designs for chair legs and pilaster fluting. Can also be used for edge profiling. DESCRIPTION A range of cutters which are ideal for producing barley twist designs for chair legs and pilaster fluting. Please also see the TTGC and the Ogee range for alternative cutters that may be used for fluting. TTBTC1 - Astragal Effect gives an extra feature to turned parts. Can also be used as an edge profile or special panel effect. TTBTC2 - This Shallow Radius cutter is very popular for standard barley twist design. Ideal for use on heavy duty lathes with routing attachment. TTBTC3 - This Ovolo Cutter is a deeper version of TTBTC2. Can be used for engraving when used with a CNC router machine. TTBTC4 - This Double Radius Effect cutter can be used as an edge mould cutter. TTBTC5 - The largest Ogee Effect cutter in this range. An ideal choice for flat roping or parallel fluting. TTBTC6 - The smaller version of the TTBTC5 Ogee Cutter. Can also be used for roping effect and fluting as well as panel raising.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Hand Rail Mould TCT

    £105.53
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Keyhole Slot Bearing Guided TCT

    £51.99 – £55.06
    TCT Undercut With Bearing A range of cutters used to produce a recess on the underside of lettering. DESCRIPTION A range of cutters used to produce a recess on the underside of lettering.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Worktop Router Cutters TCT

    £198.00
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Dowel Drills Lip & Spur Long Series with 10mm parallel shank TCT

    £55.06 – £81.05
    A range of lip and spur drills with 10mm diameter parallel shanks. Available with right hand rotation.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Dowel Drills Lip & Spur with 1/4 parallel shank TCT

    £30.59
    TCT Lip and Spur Dowell Drills For use in plunge routers and drilling machines, the slow spiral design allow these tools to run at a higher RPM than standard drills. The sizes offered here produce the correct hole diameter for the sizes needed for popular dowel sizes.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Cylindrical Borers 2 wing & No scribes TCT

    £53.52 – £65.75
    2 Wing with C/Point without Scribers TCT 2 wing available with or without scribers and parallel shanks. DESCRIPTION 2 wing available with or without scribers and parallel shanks. Right hand with centre point. Left hand available to special order - please contact the Sales Department for details. For boring bits at above 80mm overall length please contact the Sales Department for pricing and availability. These boring bits must be used in fixed head machines only, never in hand-held routing machines or hand-held drills. Select correct boring bit design for machine, material and thickness: Drill or Boring Machines: Softwood, Chipboard - Use Scribers: 15mm-35mm 3000-6000 RPM, 35mm-50mm 3000 RPM, 50mm-100mm 2000 RPM. Hardwood - Use Scribers: 15mm-35mm 3000 RPM, 35mm-50mm 3000 RPM, 50mm-100mm 1500 RPM. MDF - Use Scribers: 15mm-35mm 3000-6000 RPM, 35mm-50mm 3000 RPM, 50mm-100mm 1500 RPM. Laminate - Use Scribers: 15mm-35mm 3000-6000 RPM, 35mm-50mm 3000 RPM, 50mm-100mm 2000 RPM. Diameters of 20mm and above with Scribers will burn at over 6000 RPM. Do not use Scribers on solid laminates. Router Machines: Softwood, Hardwood, Chipboard, MDF, Laminate - No Scribers over 6000RPM: 15mm-35mm 10000 RPM, 35mm-50mm 6000 RPM, 50mm-100mm 3000 RPM.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Cylindrical Borers 2 wing 2 Scribes with 10mm shanks with flat TCT

    £51.99 – £94.81
    DESCRIPTION 2 wing with or without centre point and with or without scribers,  shanks are 10mm with flat on one side and end adjusting screw. Right hand with centre point. These boring bits must be used in fixed head machines only, never in hand-held routing machines or hand-held drills. Softwood, Chipboard - Use Scribers: 15mm-35mm 3000-6000 RPM, 35mm-50mm 3000 RPM, 50mm-100mm 2000 RPM. Hardwood - Use Scribers: 15mm-35mm 3000 RPM, 35mm-50mm 3000 RPM, 50mm-100mm 1500 RPM. MDF - Use Scribers: 15mm-35mm 3000-6000 RPM, 35mm-50mm 3000 RPM, 50mm-100mm 1500 RPM. Laminate - Use Scribers: 15mm-35mm 3000-6000 RPM, 35mm-50mm 3000 RPM, 50mm-100mm 2000 RPM. Diameters of 20mm and above with Scribers will burn at over 6000 RPM. Do not use Scribers on solid laminates. Router Machines: Softwood, Hardwood, Chipboard, MDF, Laminate - No Scribers over 6000RPM: 15mm-35mm 10000 RPM, 35mm-50mm 6000 RPM, 50mm-100mm 3000 RPM.
    Select options This product has multiple variants. The options may be chosen on the product page Details