Facebook

Right Hand

  •

    Dowel Drills 70mm O/All ‘V’ Point with 10mm shank with flat TCT

    £29.05 – £38.23
    A range of 60 degree inclusive V Point drills with 10mm diameter shanks that have a flat on one side and length adjusting screw in the end. Available with right hand or left hand rotation.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • T Slot TCT & PCD

    £50.47 – £300.00
    TCT T-Slot Square Edged Designed for creating the T-slot in wall panels used in the point of sale industry for shelving and display purposes.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Staff Bead – Full Bullnose TCT

    £77.99 – £140.68
    TCT Bullnose Staff Bead A full bullnose radius for stair treads, nosings, window boards and edge mouldings Flats at top and bottom of the cutting edges create fillets on stock thicker than the nose diameter.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Counter Sinks Shankless for shank and flute fixing TCT

    £32.11 – £53.52
    Left Hand Counter Sink TCT Designed to fit metric boring bits with 10mm Shank. Suitable for 'V' point drills, Lip and Spur and most dowel drills. DESCRIPTION Designed to fit metric boring bits with 10mm Shank. Left Hand or Right Hand rotation. Suitable for 'V' point drills, Lip and Spur and most dowel drills. TTMBC4/10 for fixing onto the Shank section, for drill diameter 4-10mm. TTMBCF range for fixing directly onto the Flute section.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Dowel Drills Lip & Spur Long Series with 10mm parallel shank TCT

    £55.06 – £81.05
    A range of lip and spur drills with 10mm diameter parallel shanks. Available with right hand rotation.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Chamfer and Combination Trimmer TCT

    £30.58 – £42.82
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Flush Trim bearing guided 90 Degree Replacement TC Tip

    £55.06 – £162.46
    This range are ideal for use on wood, plywood, MDF and other wood composites, plastics, and solid surface materials. Widely used for copy profiling and flush trimming, the replaceable tip design provides a constant diameter and the flexibility of instant tip changes whilst onsite. The L209-OH tip has one cutting edge and is non reversible, the others are reversible. Tips are sold in boxes on 10.  
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Sash Bar TCT

    £74.94 – £133.04
    A range of Grecian and Roman Ovolo Effect cutters, essential for faithful matching of Georgian window repair or production.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Hinge Recessor

    £32.11 – £36.70
    HINGE AND FIRE STRIP RECESSER TCT A cutter ideal for hinge recessing and the underside of handrails, these have extra long shanks for use with the popular hinge jigs on the market
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Corner Ovolo TCT

    £73.41 – £114.70
    TCT Corner Ovolo Profiles and moulds in one operation. Ideal for aperture cutting, ie snooker table pockets, worktops and cover mouldings. DESCRIPTION WCO Type have plunge facility. WCOB Type have bearing.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Chamfer and Radius Sets bearing guided for Top and Bottom Profiling TCT

    £91.76 – £133.04
    TCT Adjustable Top and Bottom Chamfer with Bearing DESCRIPTION For bevelling and trimming the top and bottom edges of the workpiece. Adjust the four wing trimmer blocks with spacers for differing widths of material. Maximum material thickness 15mm for the DCB16 and is fixed Maximum material thickness 32mm, minimum material thickness 16mm for the BCS38. Maximum material thickness 36mm, minimum material thickness 19mm for the BGAC45. To extend the life of cutting edges use 26mm bearing.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Drill holder with 10mm shank with flat TCT

    £16.83
    Universal Drill Adaptor suits 2mm diameter drill These Universal Drill Adaptors have a 10mm Shank with a flat on one side and the drill is secured with a grub screw.. DESCRIPTION These Universal Drill Adaptors have a 10mm Shank with a flat on one side and the drill is secured with a grub screw.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Perfect V Engraving Replacement TC Tip

    £86.43 – £99.40
    This range of single flute RT cutters are used to produce chamfers and are ideal for V grooves on softwood, hardwood, MDF and other manmade materials. The design and the specially ground tip produce a perfect V in the bottom of the groove. Angles are measured from the vertical, i.e. a TTVGC60SFRT-1/2 has an inclusive angle of 120 degrees on the tool. Cutters come complete with one tip already installed, the L308 tips are reversible the others are non reversble. Tips are sold in boxes of 10.  
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Downturn Rebate Cutter TCT

    £73.59
    Downturn Rebate Cutter Has many cutting and grooving uses in decorative and repair work. Particularly suitable for bowl replacement. Lower illustration shows method of removing bowl from worktop. DESCRIPTION To produce a 13mm rebate for the downturns on solid surface worktops. Fitted with a plastic sleeved bearing TTPB127.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Dowel Drills 77mm O/All Lip & Spur with 10mm shank with flat TCT

    £35.17 – £44.36
    A range of lip and spur boring bits with 10mm diameter shanks that have a flat on one side and length adjusting screw in the end. Available with right hand or left hand rotation.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Edge Mould TCT

    £79.92 – £149.86
    TCT Profile Edge Mould This range of edge moulding offers a varied selection of profiles for table edgings
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Spiral 3 flute router cutter for general use on wood based materials STC

    £40.00 – £270.00
    With either an up or downward cutting action. NEG code denotes downward cutting action, POS code denotes upward cutting action, For use with CNC machines.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Slotting

    £48.93 – £70.35
    TCT Slotting Ideal for slots in pencil box lids etc and internal slotting work. Suitable for intumescent fireproof strip.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Radius Cove Pin or Bearing Guided TCT

    £45.87 – £120.82
    TCT Cove Mould Bearing Guided Producing a quarter round on the edge of the workpiece these are ideal for detailing casework, doors and drawers, posts and columns. The cove also makes up one-half of the rule joint used on drop-leaf tables. DESCRIPTION These cutters come complete with TTB127 and TTB16 bearings. Matching rounding over cutters available for rule joints.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Fire Strip Slotter TCT

    £61.97 – £114.70
    TCT Groover Consists of Groover, Bearing and Arbor. Can be supplied for 10, 15 and 20mm strip. DESCRIPTION Consists of Groover, Bearing and Arbor. Can be supplied for 10, 15, 20 and 25mm strip. For slotting doors with a portable routing machine, using a Guide Bearing to give the correct cutting depth of 4mm. Suits Therma Seal Intumescent Strip.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Straight Single Flute Replacement TC Tip

    £81.05 – £110.10
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Dowel Drills 105mm O/All Lip & Spur with 10mm shank with flat TCT

    £40.58
    A range of lip and spur boring bits with 10mm diameter shanks that have a flat on one side and length adjusting screw in the end. Available with right hand or left hand rotation.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Keyhole Slot Bearing Guided TCT

    £51.99 – £55.06
    TCT Undercut With Bearing A range of cutters used to produce a recess on the underside of lettering. DESCRIPTION A range of cutters used to produce a recess on the underside of lettering.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Spiral 3 flute hogging router cutter for general use on wood based materials STC

    £109.43
    With either an up or downward cutting action the rougher / hogging design allows for faster feed rates where end finish is less important. NEG code denotes downward cutting action, POS code denotes upward cutting action,, For use with CNC machines.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Countersink Shankless in silver steel and TCT

    £21.41 – £55.06
    Countersink Shankless SS For Pillar drilling machines only, not on portables.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Dowel Drills 57mm O/All ‘V’ Point with 10mm shank with flat TCT

    £29.05 – £36.70
    A range of 60 degree inclusive V Point drills with 10mm diameter shanks that have a flat on one side and length adjusting screw in the end. Available with right hand or left hand rotation.  
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Straight 2 Flute Replacement TC Tip

    £136.11 – £256.93
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Dowel Drills 57mm and 67mm O/All Lip & Spur with 8mm parallel shank TCT

    £30.59 – £38.23
    A range lip and spur  drills with 8mm diameter parallel shanks that have an end adjusting ting screw. Available with right hand or left hand rotation.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Sunk Bead Decorative TCT

    £93.28 – £96.34
    This range of bead cutters produce mouldings to highlight features such as fascia rails, chair backs or decorative sections 'planted' on bedroom furniture to bring a line and feature to a continuous layout. TTDSB4 is a sunken flute cutter with a shallow radius to produce a soft effect. An ideal cutter to produce fluted pillars, for fire surrounds and 'gable ends' on bedroom furniture. Useful cutter to cut on a glue joint to hide the glue line. TTDSB5 is a sunk bead mould perfect for finishing wall unit facias and cover moulds on window sections. TTDSB7 is ideal for fluting or decorating solid surrounds.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Counterbore Shankless Silver Steel and TCT

    £29.05 – £58.11
    Shankless Counterbore For Pillar drilling machines only, not on portables. DESCRIPTION For Pillar drilling machines only, not on portables. Drills and Allen Keys not included. Available in TCT (part codes suffixed TCT) and Silver Steel (part codes suffixed SS) and to suit a selection of drill hole diameters. Please ensure correct variation is selected when ordering.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Plug Maker Tapered TCT

    £126.92
    TCT Tapered Plug Making Plug making cutter producing a tapered plug to be driven in and tightly secured. To avoid cutter deflection use this TTTPC range of cutters only on Pillar Drilling machines and do not exceed 3,000 RPM. Feed evenly into material. DESCRIPTION Plug making cutter producing a tapered plug to be driven in and tightly secured. To avoid cutter deflection use this TTTPC range of cutters only on Pillar Drilling machines and do not exceed 3,000 RPM. Feed evenly into material.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Classic Decorative Edge Mould Bearing Guided TCT

    £60.25 – £131.52
    Profile Edge Mould Classic Decor TCT Bearing Guided This classic shape is a fine cutter for reproduction furniture, bolection mould and any work in which the natural finish and beauty of wood is to be enhanced.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Surface Spoil board Planer TCT

    £36.70 – £94.10
    SPOILBOARD SURFACE PLANER 2 & 3 WING TCT For trimming aluminium flashing. DESCRIPTION TTSMC20 has a shear action for finer finish.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Spiral 3 flute with chipbreakers for general use on wood based materials STC

    £43.00 – £435.85
    With either an up or downward cutting action the chipbreaker design allows for faster feed rates where end finish is less important. NEG code denotes downward cutting action, POS code denotes upward cutting action, For use with CNC machines.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Dowel Drills 77mm O/All ‘V’ Point with 10mm shank with flat TCT

    £35.17 – £44.36
    A range of 60 degree inclusive V Point drills with 10mm diameter shanks that have a flat on one side and length adjusting screw in the end. Available with right hand or left hand rotation.
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • Placeholder

    Stair Housing Replacement TC Tip

    £106.92 – £121.73
    Ffor the popular sizes of stair treads for use in conjunction with CNC and trenching machines, cutters are offered in both left and right hand rotation. Tips are reversible and are sold in boxes of 10
    Select options This product has multiple variants. The options may be chosen on the product page Details