• Bevel Hole

    £77.91£153.13
    TCT RPS Bevel Hole These bevel hole cutters are specially developed to bevel an existing hole or to make new bevelled holes. DESCRIPTION These bevel hole cutters are specially developed to bevel an existing hole or to make new bevelled holes. TTXC906-18 and TTXC906-23 bevel plug cutters can be used to make accurate plugs for the holes produced by the TTXC901 range of bevel hole cutters.
  • TCT RPS Bevel Hole These bevel hole cutters are specially developed to bevel an existing hole or to make new bevelled holes. DESCRIPTION These bevel hole cutters are specially developed to bevel an existing hole or to make new bevelled holes. TTXC906-18 and TTXC906-23 bevel plug cutters can be used to make accurate plugs for the holes produced by the TTXC901 range of bevel hole cutters.
  • Placeholder

    Bevel Plug

    £128.95£224.33
    TCT RPS Bevel Hole These bevel hole cutters are specially developed to bevel an existing hole or to make new bevelled holes. DESCRIPTION These bevel hole cutters are specially developed to bevel an existing hole or to make new bevelled holes. TTXC906-18 and TTXC906-23 bevel plug cutters can be used to make accurate plugs for the holes produced by the TTXC901 range of bevel hole cutters.
  • 7 PIECE TCT RPS Cutter Set 1/2 Shanks Specially made tooling for repair of 'wrongly made' holes and also for decorative effects using plugs in other colours. This set includes all the TTXC901 and TTXC906 cutters. DESCRIPTION Use the Titman Plug system for a perfect repair. Specially made tooling for repair of 'wrongly made' holes and also for decorative effects using plugs in other colours. This set includes all the TTXC901 and TTXC906 cutters.
  • TCT Two Flute Bowl Aperture Trimmer Use with 30mm guide bush or Bearing on shank for opening out tops for sinks and bowls. Also for most bevel operations. DESCRIPTION Use with 30mm guide bush or Bearing on shank for opening out tops for sinks and bowls. Also for most bevel operations.
  • Box Cove

    £59.11£88.66
    TCT Two Flute Box Cove For fine work to produce double radius in one pass, adjustable should material thicknesses vary. DESCRIPTION A further extension of the guttering cutter range with deeper cut for shallow fingerpull applications. Can also be used for cove cut on worktop upstands. For use with a template and guide bush for draining board grooves. Is suitable for producing grooves to take insulation rods.
  • TCT Two Flute Classical Profile Can be used in reverse to give a similar pleasing edge effect.
  • TCT Two Flute Cove Mould With Bearing Two flute half round cutter. Ideal for a scalloped edge finish. For all types of decorative edge profiling.
  • Coving

    £94.02
    TCT Double Flute 90 degree joint fabrication radius cutter, suitable for splashback and other 90 degree joints.
  • Downturn Rebate Cutter Has many cutting and grooving uses in decorative and repair work. Particularly suitable for bowl replacement. Lower illustration shows method of removing bowl from worktop. DESCRIPTION To produce a 13mm rebate for the downturns on solid surface worktops.
  • Drain Board Heavy Duty

    £69.84£84.62
    TCT Double Flute Primarily used to produce drain board channels. For use with template and guide bush. DESCRIPTION Primarily used to produce drain board channels. For window sections, designed to help displace water and moisture off window and door frames. Can also be used as soap dish cutter. For use with template and guide bush.
  • TCT Two Flute Enhanced Edge Mould Profile Adds a pleasing mini radius to the traditional radius edge mould cutter.
  • TCT Four Flute Cutter For grooving and heavy rebate work.
  • TCT Four Wing Has many cutting and grooving uses in decorative and repair work. Particularly suitable for bowl replacement. Lower illustration shows method of removing bowl from worktop. DESCRIPTION Has many cutting and grooving uses in decorative and repair work. Particularly suitable for bowl replacement.
  • XC407 ARBOR 1/2 OR 12MM Has many cutting and grooving uses in decorative and repair work. Particularly suitable for bowl replacement. Lower illustration shows method of removing bowl from worktop.
  • TCT Four Wing Groover Has many cutting and grooving uses in decorative and repair work. Particularly suitable for bowl replacement. Lower illustration shows method of removing bowl from worktop.
  • Grooving Soft Form

    £34.93£47.01
    TCT Two Flute Grooving Soft Form DESCRIPTION TTXC606 is a range of versatile cutters for engraving 'V' grooving or 'V' channel work.
  • Hob Cutter

    £162.54
    TCT Two Flute Hob Cutter Used to produce, in one pass, the aperture in which the hob unit sits.
  • Inlay Trimmer

    £34.93£106.12
    TCT Double Flute Mini trimmers give a super fine finish. Ideal for cutting out small recesses in wall cladding for electrical fittings and suitable for trimming inlay flush and other trimming operations. Use TTTB22 Bearing for trimming overhanging countertops on undermount bowls.
  • TCT Double Flute Great care should be exercised when using this cutter to avoid 'cutter wander'. Use correct jig, template or side fence. Use a guide bush in conjunction with an offset template.
  • Non Drip

    £61.79£77.91
    TCT Double Flute This cutter produces a 'waterfall' effect on a worktop. Can be used against a wall for splashback.
  • TCT Two Flute Extended Ogee Profile A variation on the classical ogee cutter shape.
  • TCT Two Flute Ogee Profile Classic edge mould ogee profile.
  • Overhang Trimmer

    £57.76£106.12
    TCT 2 Flute Overhang Trimmer for EDGE Stainless Steel Sink Range For the initial trimming of the worktop surface. DESCRIPTION The overhang trimming cutter runs around the inner walls of the sink, Removing the bulk of the work surface from the bowl area.
  • TCT 2 Flute 10 Deg Overlay Counter Top Edge Trimmer for EDGE Stainless Steel Sink Range For trimming Karran Edgesinks. DESCRIPTION This cutter with an oversize Ti-Tire plastic bearing allows you to trim work surface material back to the sink wall by ajusting the height of the cutter. The plastic bearing runs on the inner walls of the sink.
  • Placeholder
    CT 2 Flute 45 Deg Overlay Top Edge Trimmer for EDGE Stainless Steel Sink Range For trimming Karran Edgesinks. DESCRIPTION This cutter with an oversize Ti-Tire plastic bearing allows you to trim work surface material back to the sink wall by ajusting the height of the cutter. The plastic bearing runs on the inner walls of the sink. The beauty of this profile is that when palm sanding the solid surface edge, the sander is operating at a 45 deg angle to the sink wall. This prevents any scratching of the bowl wall surface. It can significantly reduce overall sanding and finish time.
  • Overlay Trimmer

    £76.56£135.67
    TCT Double Flute For edging sinks and vanity bowls. The special taper on the Bearing sleeve allows for perfect guide following around the inside of the bowl.
  • Radius Cove

    £68.50£131.64
    TCT Double Flute Fitted with self-guiding Bearing for rounding over. See cutters TTXC301 and TTXC321 for complete rounding over.
  • TCT Double Flute TTXC611 is the perfect cutter for panel raising work. TTXC616 is designed for large 45 degree chamfer work with guide Bearing.
  • TCT Double Flute For bevelling inside bowl tops and similar applications. Avoids need to turn workpiece.
  • Roman Ogee With Bearing

    £92.69£96.70
    TCT Two Flute Spanish Edge with Bearing For all types of decorative edge profiling.
  • Rounding Over

    £139.70£157.17
    TCT Two Flute Rounding Over Fitted with a Shank mounted Bearing. First cut with TTXC301, finshing using matching TTXC321. Eliminates flat on edge.
  • Single Flute

    £29.55£33.58
    TCT Single Flute A high performance, single flute, cutter for extra clearance when cutting apertures and shaping work. The single flute gives a stronger backing support to the cutting edge.
  • Single Flute Sheared Cut

    £38.96£48.36
    TCT Double Flute Shear action downcut to reduce breakout for longer life and improved performance. Pushes waste material away from the operator.
  • Step Down

    £64.48
    TCT Double Flute For creating a 'step down' shadow line between bowl and sheet.
  • Surface Spoilboard Planer

    £106.12£111.49
    TCT Spoilboard For trimming bowls, trepanning and face milling. Ideal for removing flashing and large surface areas of raised draining board channels.

Title