25

Inlay Trimmer Bearing Guided TCT

£39.76 – £120.82

TCT Double Flute Mini trimmers give a super fine finish. Ideal for cutting out small recesses in wall cladding for electrical fittings and suitable for trimming inlay flush and other trimming operations. Use TTTB22 Bearing for trimming overhanging countertops on undermount bowls.

Select options Details
Reverse Bevel

£87.17

TCT Double Flute For bevelling inside bowl tops and similar applications. Avoids need to turn workpiece.

Select options Details
Drain Board Heavy Duty TCT

£79.51 – £96.34

TCT Double Flute Primarily used to produce drain board channels. For use with template and guide bush. DESCRIPTION Primarily used to produce drain board channels. For window sections, designed to help displace water and moisture off window and door frames. Can also be used as soap dish cutter. For use with template and guide bush.

Select options Details
Straight Fluted TCT

£12.00 – £59.00

The cutters still give a fantastic finish, great longevity of use and of course can be re-sharpened, a superb cutter at a very competitive price.

Select options Details
Straight Single and Double Fluted TCT

£24.47 – £111.64

DESCRIPTION A comprehensive range of straight fluted router cutters with diameters from 1.5mm to 50.8mm with parallel and internally threaded shank configurations. There are some left hand rotational cutters in this range. Part numbers starting with TTWLC are for use in inlay work and have a chisel point end. TTPH do not plunge.

Select options Details
V Groover TCT

£35.17 – £133.04

DESCRIPTION Ideal for veining work, freehand decor for panels and useful for character lining work on sign writing applications in solid timbers. The angle ( measurement A ) is measured from the horizontal. TTVGC45SF-1/2, TTVGC45SF-1/4, TTVGC45SF-12, TTVGC60SF-1/2, TTVGC60SF-1/4, TTVGC60SF-12, TTVGC60SF-8 cut to a point. TTVGCB45-1/4, TTVGCB60-127-1/4 have a shank mounted bearing.

Select options Details
Bevel & Chamfer TCT

£71.87 – £186.58

TCT Bevelled A range of various angles of beveled cutters designed to chamfer sections of timber, chipboard and MDF. DESCRIPTION The cutters with reference TTBCF have a tungsten carbide plunging centre tip The cutters with reference TTBC are for profiling only and do not plunge. Angles are measured from the vertical

Select options Details
Corner Ovolo TCT

£73.41 – £114.70

TCT Corner Ovolo Profiles and moulds in one operation. Ideal for aperture cutting, ie snooker table pockets, worktops and cover mouldings. DESCRIPTION WCO Type have plunge facility. WCOB Type have bearing.

Select options Details
Radius Cove TCT

£30.59 – £133.04

DESCRIPTION A comprehensive range of Core Box, Cove, Radius, Guttering cutters with radii from 1.6mm to 25.4mm. Cutters with part number starting TTCBB have a shank mounted bearing fitted.

Select options Details
Radius Cove Pin or Bearing Guided TCT

£45.87 – £120.82

TCT Cove Mould Bearing Guided Producing a quarter round on the edge of the workpiece these are ideal for detailing casework, doors and drawers, posts and columns. The cove also makes up one-half of the rule joint used on drop-leaf tables. DESCRIPTION These cutters come complete with TTB127 and TTB16 bearings. Matching rounding over cutters available for rule joints.

Select options Details
Staff Bead – Full Bullnose TCT

£77.99 – £140.68

TCT Bullnose Staff Bead A full bullnose radius for stair treads, nosings, window boards and edge mouldings Flats at top and bottom of the cutting edges create fillets on stock thicker than the nose diameter.

Select options Details
V Groover and chamfer TCT

£22.00 – £40.00

British made bearing chamfers with 2 TCT tips for clean accurate cutting and fast clearance of waste materials.

Select options Details
Roman Ogee Bearing or Pin Guided TCT

£58.11 – £97.88

Profile Edge Mould Classic Roman Ogee TCT Bearing Guided Classic Roman Ogee used in any work needing a quality finish. DESCRIPTION One cutter - three shapes by changing bearing. Cutters supplied with 12.7mm and 16mm bearings.

Select options Details
Rounding Over Pin Guided TCT

£53.52 – £88.70

TCT Rounding Over With Guide Pin Available in fractional sizes to relieve corners on small panels, or larger radii for stair nosings, window boards and many shelf and display units. DESCRIPTION. Careful feeding will prevent the pin from marking workpiece. Pin diameter 8.9mm by 6.1mm long

Select options Details
Splay and Once Rounded – Shark Nose TCT

£92.22 – £122.34

TCT Shark Nose Designed to finish off worktops, table tops and basic edge finishing requirements. Traditional once rounded and splay profile. Will radius hardwoods and softwood edgings, safe return design - ideal in kitchens, receptions and technical workplaces.

Select options Details
Sunk Bead Decorative TCT

£93.28 – £96.34

This range of bead cutters produce mouldings to highlight features such as fascia rails, chair backs or decorative sections 'planted' on bedroom furniture to bring a line and feature to a continuous layout. TTDSB4 is a sunken flute cutter with a shallow radius to produce a soft effect. An ideal cutter to produce fluted pillars, for fire surrounds and 'gable ends' on bedroom furniture. Useful cutter to cut on a glue joint to hide the glue line. TTDSB5 is a sunk bead mould perfect for finishing wall unit facias and cover moulds on window sections. TTDSB7 is ideal for fluting or decorating solid surrounds.

Select options Details
Decorative Edge

£60.25 – £102.45

Profile Edge Mould Decorative TCT The TTDEC range of tools are perfect for enhancing the appearance of square edged timber many of which offer balanced moulds for use on sections of woodwork at the centre of the design.

Select options Details
Edge Mould TCT

£79.92 – £149.86

TCT Profile Edge Mould This range of edge moulding offers a varied selection of profiles for table edgings

Select options Details
Raised Panel TCT

£61.05 – £163.62

Select options Details

Title