12

  •

    Dowel Drills 57mm O/All Lip & Spur with 10mm shank with flat TCT

    £27.36 – £50.40
    A range of lip and spur boring bits with 10mm diameter shanks that have a flat on one side and length adjusting screw in the end. Available with right hand or left hand rotation.  
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Dowel Drills 57mm O/All ‘V’ Point with 10mm shank with flat TCT

    £29.92 – £37.80
    A range of 60 degree inclusive V Point drills with 10mm diameter shanks that have a flat on one side and length adjusting screw in the end. Available with right hand or left hand rotation.  
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Dowel Drills 58mm O/All with 45 Deg chamfer on tip ends with 8mm shank + flat TCT

    £25.52 – £29.92
    A range drills with a 1mm long 45 degree chamfer on the tip edge for use in the specialized boring machine MAFELL DuoDübler . Shanks are 8mm diameter with  a flat on one side and length adjusting screw in the end. Available with right hand.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Dowel Drills 57mm and 67mm O/All Lip & Spur with 8mm parallel shank TCT

    £31.51 – £39.38
    A range lip and spur  drills with 8mm diameter parallel shanks that have an end adjusting ting screw. Available with right hand or left hand rotation.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Dowel Drills 70mm O/All Lip & Spur with 10mm shank with flat TCT

    £29.92 – £39.38
    A range of lip and spur boring bits with 10mm diameter shanks that have a flat on one side and length adjusting screw in the end. Available with right hand or left hand rotation.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Dowel Drills 70mm O/All ‘V’ Point with 10mm shank with flat TCT

    £29.92 – £39.38
    A range of 60 degree inclusive V Point drills with 10mm diameter shanks that have a flat on one side and length adjusting screw in the end. Available with right hand or left hand rotation.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Dowel Drills 75mm O/All Lip & Spur with 10mm shank with flat TCT

    £15.19
    A range of lip and spur boring bits with 10mm diameter shanks that have a flat on one side and length adjusting screw in the end. Available with right hand or left hand rotation.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Template profiler with shank mounted bearing TCT

    £39.38 – £96.08
    These router cutters are designed for use on template and pattern work, blind profiling and plunging They have a shank mounted bearing which will run along and follow the template which is attached to the work piece with the end result being an exact duplicate of the template itself.  
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Dowel Drills 77mm O/All Lip & Spur with 10mm shank with flat TCT

    £36.23 – £45.69
    A range of lip and spur boring bits with 10mm diameter shanks that have a flat on one side and length adjusting screw in the end. Available with right hand or left hand rotation.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Dowel Drills 77mm O/All ‘V’ Point with 10mm shank with flat TCT

    £36.23 – £45.69
    A range of 60 degree inclusive V Point drills with 10mm diameter shanks that have a flat on one side and length adjusting screw in the end. Available with right hand or left hand rotation.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Dowel Drills 85mm O/All Lip & Spur with 10mm shank with flat TCT

    £34.49 – £43.51
    A range of lip and spur boring bits with 10mm diameter shanks that have a flat on one side and length adjusting screw in the end. Available with right hand or left hand rotation.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Dowel Drills 105mm O/All Lip & Spur with 10mm shank with flat TCT

    £41.80
    A range of lip and spur boring bits with 10mm diameter shanks that have a flat on one side and length adjusting screw in the end. Available with right hand or left hand rotation.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Dowel Drills Lip & Spur Long Series with 10mm parallel shank TCT

    £56.71 – £83.48
    A range of lip and spur drills with 10mm diameter parallel shanks. Available with right hand rotation.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Cylindrical Borers 2 wing 2 Scribes with parallel shanks TCT

    £56.70 – £151.21
    DESCRIPTION 2 wing with  centre point and with or without scribers and parallel shanks. Right hand with centre point. These boring bits must be used in fixed head machines only, never in hand-held routing machines or hand-held drills. Softwood, Chipboard - Use Scribers: 15mm-35mm 3000-6000 RPM, 35mm-50mm 3000 RPM, 50mm-100mm 2000 RPM. Hardwood - Use Scribers: 15mm-35mm 3000 RPM, 35mm-50mm 3000 RPM, 50mm-100mm 1500 RPM. MDF - Use Scribers: 15mm-35mm 3000-6000 RPM, 35mm-50mm 3000 RPM, 50mm-100mm 1500 RPM. Laminate - Use Scribers: 15mm-35mm 3000-6000 RPM, 35mm-50mm 3000 RPM, 50mm-100mm 2000 RPM. Diameters of 20mm and above with Scribers will burn at over 6000 RPM. Do not use Scribers on solid laminates. Router Machines: Softwood, Hardwood, Chipboard, MDF, Laminate - No Scribers over 6000RPM: 15mm-35mm 10000 RPM, 35mm-50mm 6000 RPM, 50mm-100mm 3000 RPM.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Twist Drill slow spiral V/Pt in HSS and TCT

    £4.73 – £47.26
    Twist Drills Slow Spiral for plastics, brass, chipboard and MDF DESCRIPTION The design of the slow spiral drills are better suited for use with the counterbore and countersink ranges as they help to prevent clogging. (over the faster helix versions.)
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Straight for acrylic cutting STC

    £37.50 – £102.38
    STRAIGHT FLUTED SOLID CARBIDE For use on plastics, acrylics, composites and light metals . DESCRIPTION These straight double fluted plunging solid carbide router cutters are ideal for use on plastics, acrylics, foam ABS, aluminium and magnesium . Please ensure that the shank is inserted fully into the collet, this helps reduce vibration which causes a reduction in the quality of finish.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Replacement TC Tips 1 Hole with 2 or 4 Cutting Edges

    £26.43 – £118.18
    Sold in boxes of 10 TC blades.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Spiral single flute with upward shear angle for use on Aluminium and uPVC extrusion HSSE

    £18.94 – £53.19
    DESCRIPTION These cutters are designed with a plunge facility for creating slots or channels for locks and drainage.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Spiral single flute with upward shear angle for use on Aluminium and uPVC extrusion STC

    £56.71 – £127.66
    DESCRIPTION Made from solid tungsten carbide these are designed with a plunge facility for creating slots or channels for locks and drainage.  
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Spiral double flute with upward shear angle for use on Aluminium and uPVC extrusion HSSE

    £28.31 – £64.50
    DESCRIPTION These cutters are designed with a plunge facility for creating slots or channels for locks and drainage. The double flute makes them more suitable for non ferrous metals.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Hinge Recessor

    £33.07 – £37.80
    HINGE AND FIRE STRIP RECESSER TCT A cutter ideal for hinge recessing and the underside of handrails, these have extra long shanks for use with the popular hinge jigs on the market
    Select options This product has multiple variants. The options may be chosen on the product page Details
Go to Top