2

  • Weatherseal Seal TCT

    £33.64£61.17
    Weatherstrip Cutters A range of cutters designed to make the fitting of weatherstrip to door and window frames quick and easy.
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • Weatherseal Recessing & Seals

    £100.94£178.94
    TCT Weatherseal Recessing & Seals The perfect weatherstrip cutter, ideal for use with a portable router on site. DESCRIPTION TTWSC2 is used without a bearing. TTWSC3 has a 90mm overall length to suit 40-50mm rebate on doors. TTWSC4 routs a 2.7mm groove, 6mm deep. TTWSC5 suits the slot seal Carripile I weatherstrip system. TTSSC1 is a Smoke Seal cutter, designed to run off the bearing and give correct depth of cut to take a Quick Fit Smoke Seal Strip.
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • Sash Bar TCT

    £74.94£133.04
    A range of Grecian and Roman Ovolo Effect cutters, essential for faithful matching of Georgian window repair or production.
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • TCT Rounding Over A unique cutter designed for short skirting production, or for relieving a square section.
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • Torus Mould Profiles TCT

    £119.28£143.75
    TCT Multi-Mould DESCRIPTION TTTOR25 gives an ornate moulding used in full or in part. TTTOR22 is a possible picture rail and cover mould cutter. TTTOR27 ideal to use the complete mould or part for short production runs. Excellent cutter to produce ornate skirting and architrave moulding. TTTOR-B gives a deep cavetto effect with a bead to break up the line of the mould. The fine lines of this cutter make it an excellent choice for matching skirting and architrave. TTTOR-C is a variation of the Torus Mould (TTTOR-T).
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • TCT Capillary Water Channel Groove All cutters in this range are non plunging but with bottom cutting action. DESCRIPTION This is designed to place a capillary groove on sill sections when used on site in a portable machine.
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • Ventilation Slot TCT

    £79.51£87.17
    TCT Two Flute Ventilation Slot Slots and produces a radius on the upper edge in one pass.
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • Raised Panel TCT

    £61.05£163.62
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • RouterBorer These are a designed for use at a faster RPM than standard boring bits for recessing circular hinges. A template and a guide will ensure accurate hole placement on the workpiece and that the router itself is secure with no sideways movement DESCRIPTION The CB version have chip breakers for use on more fibrous materials. The design allows the tool to run at speeds of 1000-20,000 RPM.
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • Pin diameter is 5.5mm by 5.5mm long
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • Edge Mould TCT

    £79.92£149.86
    TCT Profile Edge Mould This range of edge moulding offers a varied selection of profiles for table edgings
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • TAPERED DOUBLE FLUTE TCT Two flute cutters with taper designed for constructing vacuum forming moulds. DESCRIPTION Two flute cutters with taper designed for constructing vacuum forming moulds. 2 degree tapered side allows easier release. TTH58212T can produce a leading edge on a door.
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • Decorative Edge

    £60.25£102.45
    Profile Edge Mould Decorative TCT The TTDEC range of tools are perfect for enhancing the appearance of square edged timber many of which offer balanced moulds for use on sections of woodwork at the centre of the design.
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • Hinge Recessor

    £32.11£36.70
    HINGE AND FIRE STRIP RECESSER TCT A cutter ideal for hinge recessing and the underside of handrails, these have extra long shanks for use with the popular hinge jigs on the market
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • Bevel with Bottom Radius TCT

    £88.70£96.35
    TCT Bevelled With Bottom Radius A range of bevelled cutters with a bottom radius ideal for scallop fluting and finger pull applications.
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • Sunk Bead Decorative TCT

    £93.28£96.34
    This range of bead cutters produce mouldings to highlight features such as fascia rails, chair backs or decorative sections 'planted' on bedroom furniture to bring a line and feature to a continuous layout. TTDSB4 is a sunken flute cutter with a shallow radius to produce a soft effect. An ideal cutter to produce fluted pillars, for fire surrounds and 'gable ends' on bedroom furniture. Useful cutter to cut on a glue joint to hide the glue line. TTDSB5 is a sunk bead mould perfect for finishing wall unit facias and cover moulds on window sections. TTDSB7 is ideal for fluting or decorating solid surrounds.
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • TCT Two Flute Adjustable Double Radius Use with 1/2 inch thick material produces double radius in one pass.
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • SPOILBOARD SURFACE PLANER 2 & 3 WING TCT For trimming aluminium flashing. DESCRIPTION TTSMC20 has a shear action for finer finish.
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • Capillary Groove TCT

    £120.82£138.61
    TCT Capillary Groove Capillary groove cutters for sills and window sections. DESCRIPTION TTUSD36 for use with the Schlegel Q-LON weatherstrip.
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • Select options This product has multiple variants. The options may be chosen on the product page Details
  • DESCRIPTION These cutters are designed with a plunge facility for creating slots or channels for locks and drainage. The double flute makes them more suitable for non ferrous metals.
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • Stair Housing TCT

    £64.23£84.11
    TCT Stair Tread Housing A range of cutters for the popular sizes of stair treads for use in conjunction with jigs and trenching machines. For the stair trenching machines some cutters are offered in both rotation, left and right hand
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • Sunk Bead

    £85.64£96.34
    These cutters can be used as matched sets of flute and beads or as individual sunk bead and reads. TTDSB8, TTDSB9 and TTDSB10 are suitable for moulding table surrounds and capillary drip grooves for window surrounds. TTRDSB8, TTRDSB9 and TTRDSB10 are matched to the TTDSB8, TTDSB9 and TTDSB10 range for the production of strip planking.
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • Stair Nosing TCT

    £61.48£104.51
    TCT Stair Nosing This range have a flatter style to a standard full bull nose offering an alternative profile on stair treads, window boards and these can also be used to relieve sharp corners on the standard board thickness. DESCRIPTION The TTSNCB10 has a bottom bearing.
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • Sunk Bead Bearing Guided TCT

    £84.11£113.17
    Used to create a fluting effect on the edge of furniture. TTRWHC range are used to create a fluting effect on the edge of furniture. TTSBCB range has a removeable bearing system. When requiring a self guiding effect ensure the jig has clearance between workpiece and bottom of cutter. TTHHC20 and TTRHHC20 complement each other and when used together perform the cuts needed to form a drop leaf table joint. Please note some of these products are Made To Order.
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • DOWNCUT SHEAR DOUBLE FLUTE TCT Shear action downcut to reduce breakout. DESCRIPTION For short producton runs only. For longer and improved performance see our Solid Carbide Range. *These tools are designed to give a 'tear' free groove in conjunction with a tight housed joint when using plywood.
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • TCT Shark Nose Designed to finish off worktops, table tops and basic edge finishing requirements. Traditional once rounded and splay profile. Will radius hardwoods and softwood edgings, safe return design - ideal in kitchens, receptions and technical workplaces.
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • Slotting

    £48.93£70.35
    TCT Slotting Ideal for slots in pencil box lids etc and internal slotting work. Suitable for intumescent fireproof strip.
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • Sinking & Strip Recessor

    £71.87£79.69
    SINKING AND STRIP RECESSING TCT For library and book shelving strip/tonk strip.
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • Planer Blades Portable TC 80.5mm and 82mm To suit every popular make of machine. DESCRIPTION To suit every popular make of machine. Prices are per pair of blades. TTKF80 suits: AEG (Atlas Copco) - 450 DEWALT - DW676K ELU MFF80/MFF40/PF161 ELU - MFF40, MFF80K, MFF80, MFF81K TTKF82N suits: AEG (Atlas Copco) - EH82, EH82.1, EH700, H822, H750, H500, EH3-82, EH800, EH450 BLACK & DECKER - BD710, DN710, DN720, BD711, KW712, KW713,KW725, BD713, BD725 BOSCH - PHO2-82, PHO3-82/B, PHO15-82, PHO16-82, PHO25-82, PHO30-82, PHO100, PHO150, PHO200, PHO300, 1592-9, GH0282, GH31-82, GHO36-82C CASALS - CE82, CE98ACE DEWALT - DW677, DW678K, DW678EK, DW680, D26500, D26501 DRAPER - PT682, P882 FELISATTI - TP282 FERM - FP82 FREUD - FE82, FE82VCE HAFFNER - FH224 HITACHI - F20*, FU20*, P20V, P20SA HOLZ-HER - 2321, 2312-S, 2322, 2223 (NEW) MAFELL - EHU82, MHU82, MHU82S, MHU82D MAKITA - M102*, 1900*, 1900B*, 1901*, 1902, 1125*, 1100*, 1923*, 1923BD, 1923H, FB080 METABO - EXPERT, 4382, HO0882, HO8382 NOTOOL - NPT82 PERLES - SK82A PEUGEOT - RA82CS, RA400, RA3/82 RYOBI - L282, L1323A*, HL-82, L-1835, L180, GH014, EPN-7582 SKIL - 92H, 94H, 95H, 96H, 97H WOLF/KANGO - 8108, 8614*, 8057 Before fitting planer blades ensure the mains supply is completely disconnected. Conversion kit required for Makita, Ryobi, Hitachi and Kango
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • Sold in boxes of 10 TC blades.
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • Sold in boxes of 10 TC blades.
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • The Titman Multi-Profiler Cutterhead is designed to take the popular WS 40m and 50mm cutter profiles. Using two location pins and a recessed locking flange, the Multi-Profiler is easily changed and secured, offering a whole range of standard and special profiles (specials on request). THIS IS FOR THE TOOL BODY ONLY. A large range of blades are available, download the catalogue pdf on our website,  part codes TTFK000 to TTFK100 for blades and TTDK000 to TTDK100 for defectors.  
    Select options This product has multiple variants. The options may be chosen on the product page Details
  •   DESCRIPTION  
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • STRAIGHT FLUTED SOLID CARBIDE For use on plastics, acrylics, composites and light metals . DESCRIPTION These straight double fluted plunging solid carbide router cutters are ideal for use on plastics, acrylics, foam ABS, aluminium and magnesium . Please ensure that the shank is inserted fully into the collet, this helps reduce vibration which causes a reduction in the quality of finish.
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • TCT Two Flute Rounding Over Fitted with a Shank mounted Bearing. First cut with TTXC301, finshing using matching TTXC321. Eliminates flat on edge.
    Select options This product has multiple variants. The options may be chosen on the product page Details