Facebook

2

  •

    Straight Double Flute Downard Sheared Cut TCT

    £44.36 – £55.06
    TCT Double Flute Shear action downcut to reduce breakout for longer life and improved performance. Pushes waste material away from the operator.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Inlay Trimmer Bearing Guided TCT

    £39.76 – £120.82
    TCT Double Flute Mini trimmers give a super fine finish. Ideal for cutting out small recesses in wall cladding for electrical fittings and suitable for trimming inlay flush and other trimming operations. Use TTTB22 Bearing for trimming overhanging countertops on undermount bowls.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Bowl Aperture Trimmer TCT

    £71.87
    TCT Two Flute Bowl Aperture Trimmer Use with 30mm guide bush or Bearing on shank for opening out tops for sinks and bowls. Also for most bevel operations. DESCRIPTION Use with 30mm guide bush or Bearing on shank for opening out tops for sinks and bowls. Also for most bevel operations.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Bevel Matching Bearing Guided TCT

    £108.58
    TCT RPS Bevel Hole These bevel hole cutters are specially developed to bevel an existing hole or to make new bevelled holes. DESCRIPTION These bevel hole cutters are specially developed to bevel an existing hole or to make new bevelled holes. TTXC906-18 and TTXC906-23 bevel plug cutters can be used to make accurate plugs for the holes produced by the TTXC901 range of bevel hole cutters.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Reverse Bevel

    £87.17
    TCT Double Flute For bevelling inside bowl tops and similar applications. Avoids need to turn workpiece.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Overlay Trimmer Bearing Guided TCT

    £87.17 – £91.76
    TCT Double Flute For edging sinks and vanity bowls. The special taper on the Bearing sleeve allows for perfect guide following around the inside of the bowl.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Overlay Trimmer Bearing Guided TCT

    £120.07 – £154.46
    TCT Double Flute For edging sinks and vanity bowls. The special taper on the Bearing sleeve allows for perfect guide following around the inside of the bowl.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Step Down

    £73.41
    TCT Double Flute For creating a 'step down' shadow line between bowl and sheet.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Waterfall Profile Bearing Guided TCT

    £91.76 – £94.81
    TCT Double Flute Helps to reduce the effect of overlay joint line. DESCRIPTION Sometimes called 'waterfall effect' giving a non-drip edge to a worktop. TTXC214 has a shorter cut length, ideal for use on 12.5mm thick material. TTXC216 is fitted with self-guided Bearing for use with 15mm thick material. TTXC221 is ideal for use on 19mm (3/4 inch) thick material.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Non Drip TCT

    £87.17
    TCT Double Flute This cutter produces a 'waterfall' effect on a worktop. Can be used against a wall for splashback.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Rounding Over Bearing Guided TCT

    £78.00 – £149.87
    TCT Double Flute Fitted with self-guiding Bearing for rounding over. See cutters TTXC301 and TTXC321 for complete rounding over.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Hob Cutter TCT

    £160.57 – £185.05
    TCT Two Flute Hob Cutter Used to produce, in one pass, the aperture in which the hob unit sits.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Box Cove TCT

    £67.28 – £100.94
    TCT Two Flute Box Cove For fine work to produce double radius in one pass, adjustable should material thicknesses vary. DESCRIPTION A further extension of the guttering cutter range with deeper cut for shallow fingerpull applications. Can also be used for cove cut on worktop upstands. For use with a template and guide bush for draining board grooves. Is suitable for producing grooves to take insulation rods.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Drain Board Heavy Duty TCT

    £79.51 – £96.34
    TCT Double Flute Primarily used to produce drain board channels. For use with template and guide bush. DESCRIPTION Primarily used to produce drain board channels. For window sections, designed to help displace water and moisture off window and door frames. Can also be used as soap dish cutter. For use with template and guide bush.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Coving TCT

    £107.05
    TCT Double Flute 90 degree joint fabrication radius cutter, suitable for splashback and other 90 degree joints.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Inlay Rebater TCT

    £70.35 – £88.70
    Produces a slot to take inlays of a different col0ur to produce a line effect joint
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Tongue and Groove TCT

    £125.40
    TCT Double Flute These cutters are designed to produce top surface perfect butt joints. Suitable for materials 6mm (15/64 inch) to 17mm (43/64 inch) thick.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Knuckle Bone TCT

    £113.17
    TCT Double Flute Great care should be exercised when using this cutter to avoid 'cutter wander'. Use correct jig, template or side fence. Use a guide bush in conjunction with an offset template.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • V Groove Folding Tool

    £45.88 – £93.28
    TCT Two Flute Grooving Soft Form Single flute TCT and RT versions available.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Raised Panel Bevel Bearing Guided TCT

    £105.53 – £120.82
    TCT Double Flute TTXC611 is the perfect cutter for panel raising work. TTXC616 is designed for large 45 degree chamfer work with guide Bearing.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Cove Mould Bearing Guided TCT

    £93.28
    TCT Two Flute Cove Mould With Bearing Two flute half round cutter. Ideal for a scalloped edge finish. For all types of decorative edge profiling.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Plug Hole Maker TCT

    £88.70 – £174.34
    TCT RPS Bevel Hole These bevel hole cutters are specially developed to bevel an existing hole or to make new bevelled holes. DESCRIPTION These bevel hole cutters are specially developed to bevel an existing hole or to make new bevelled holes. TTXC906-18 and TTXC906-23 bevel plug cutters can be used to make accurate plugs for the holes produced by the TTXC901 range of bevel hole cutters.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Plug Maker Tapered TCT

    £146.81 – £255.40
    TCT RPS Bevel Hole These bevel hole cutters are specially developed to bevel an existing hole or to make new bevelled holes. DESCRIPTION These bevel hole cutters are specially developed to bevel an existing hole or to make new bevelled holes. TTXC906-18 and TTXC906-23 bevel plug cutters can be used to make accurate plugs for the holes produced by the TTXC901 range of bevel hole cutters.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Straight 2 Flute Replacement TC Tip

    £136.11 – £256.93
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Straight Replacement Non Plunging TC Tip

    £129.98 – £134.58
    These cutter are double flute and they are non plunging with an outside fixing style for the use of profiling, the tips have 4 cutting edges so they can also be ramped down into workpiece. Tips are reversible and are sold in boxes of 10
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Template profiler with shank mounted bearing Replacement TC Tip

    £71.23 – £87.79
    A particular advantage to this replacement tip style over the conventional brazed variety is that the diameter remains constant. These double and single flute style flush trim router cutters are designed for use on template and pattern work and can be used in hand-held and table-mounted routers. They have a shank mounted bearing which will run along and follow the template which is attached to the workpiece with the end result being an exact duplicate of the template itself. The L209-OH tip has one cutting edge and is non reversible, the others are reversible. Tips are sold in boxes on 10.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Flush Trim bearing guided 90 Degree Replacement TC Tip

    £55.06 – £162.46
    This range are ideal for use on wood, plywood, MDF and other wood composites, plastics, and solid surface materials. Widely used for copy profiling and flush trimming, the replaceable tip design provides a constant diameter and the flexibility of instant tip changes whilst onsite. The L209-OH tip has one cutting edge and is non reversible, the others are reversible. Tips are sold in boxes on 10.  
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Flush Trim Middle Bearing Guided Replacement TC Tip

    £137.02 – £156.00
    A unique cutter that will trim the top and bottom edges of a panel simultaneously, the centrally mounted bearing follows the profile. Tips are reversible and are sold in boxes of 10.    
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Surface Spoilboard Planer Replacement TC Tip

    £184.44 – £349.00
    Ideal for skimming on CNC routing machines. Tips are reversible and are sold in boxes of 10.  
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Bevel and Chamfer Bearing Guided Replacement TC Tip

    £96.34
    Tips are reversible and are sold in boxes of 10.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Bevel and Chamfer Light Duty Replacement TC Tip

    £91.76
    Angles are measured from the horizontal. Tips are reversible and are sold in boxes of 10.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Bevel and Chamfer Replacement TC Tip

    £167.91 – £256.92
    This tool does not plunge. Tips are reversible and are sold in boxes of 10
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Dowel Drills 57mm O/All Lip & Spur with 10mm shank with flat TCT

    £27.36 – £48.93
    A range of lip and spur boring bits with 10mm diameter shanks that have a flat on one side and length adjusting screw in the end. Available with right hand or left hand rotation.  
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Dowel Drills 57mm O/All ‘V’ Point with 10mm shank with flat TCT

    £29.05 – £36.70
    A range of 60 degree inclusive V Point drills with 10mm diameter shanks that have a flat on one side and length adjusting screw in the end. Available with right hand or left hand rotation.  
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Dowel Drills 58mm O/All with 45 Deg chamfer on tip ends with 8mm shank + flat TCT

    £25.52 – £29.05
    A range drills with a 1mm long 45 degree chamfer on the tip edge for use in the specialized boring machine MAFELL DuoDübler . Shanks are 8mm diameter with  a flat on one side and length adjusting screw in the end. Available with right hand.
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Dowel Drills 57mm and 67mm O/All Lip & Spur with 8mm parallel shank TCT

    £30.59 – £38.23
    A range lip and spur  drills with 8mm diameter parallel shanks that have an end adjusting ting screw. Available with right hand or left hand rotation.
    Select options This product has multiple variants. The options may be chosen on the product page Details