Tooling for Solid Surface

Home >
Tooling for Solid Surface

Need solid surface router bits you can rely on?

With Titman, you can buy solid surface tools in UK for Corian, Hi-Macs, Staron, Avonite and Hanex

The carbide used on these solid surface cutters has been developed in conjunction with DuPont-Genk.
All profile cutters and relevant straight cutters are profiled to minimise stress fractures.
The soft corners produced by Titman Cutters for Corian, Hi-Mac and Staron and other solid surfaces make finishing that much easier.
The soft corners on the finished piece help to prevent food retention on the work surgaces.
All Titman cutters for solid surface materials are designed to accommodate the Ti-Tire range of bearings.

corners on solid surfaces

TCT Two Flute Bowl Aperture Trimmer

Use with 30mm guide bush or Bearing on shank for opening out tops for sinks and bowls. Also for most bevel operations.
TCT Two Flute Bevel Matching

Fitted with self-guiding Bearing (Shank mounted). For edging counter tops, bevel joints and sink profiles.
TCT Two Flute Reverse Bevel

For bevelling inside bowl tops and similar applications. Avoids need to turn workpiece.
TCT Two Flute Overlay Trimmer

For edging sinks and vanity bowls. The special taper on the Bearing sleeve allows for perfect guide following around the inside of the bowl.
TCT Two Flute Step Down

For creating a 'step down' shadow line between bowl and sheet.
TCT Two Flute Non-Drip Edge

Helps to reduce the effect of overlay joint line.
TCT Two Flute Non Drip

This cutter produces a 'waterfall' effect on a worktop. Can be used against a wall for splashback.
TCT Two Flute Rounding Over

Fitted with a Shank mounted Bearing. First cut with TTXC301, finshing using matching TTXC321. Eliminates flat on edge.
TCT Two Flute Radius

Fitted with self-guiding Bearing for rounding over. See cutters TTXC301 and TTXC321 for complete rounding over.
TCT Two Flute Radius

Rounding over effect or full bullnose for three and four sheet thickness. First cut with TTXC301, finshing using matching TTXC321. Eliminates flat on edge.
TCT Two Flute Adjustable Double Radius

Use with 1/2 inch thick material produces double radius in one pass.
TCT Two Flute Hob Cutter

Used to produce, in one pass, the aperture in which the hob unit sits.