A range of solid carbide spiral flute designed router cutters for use on general wood based materials, hardwood, softwood, MDF, HDF, chipboard, plywood, with certain styles designed specifically for use on acrylics, composites and light metals. The polychristalline diamond tools in this section offer greater performance when used for joining, sizing, folding and grooving chipboard coated and veneered panels, laminate and mineral boards.
-
With an up and downard cutting action on the one tool, the fluted compression style allows for fine finish on the top and bottom edges of the board. NEG code denotes downward cutting action, POS code denotes upward cutting action, For use with CNC machines. -
With either an up or downward cutting action. NEG code denotes downward cutting action, POS code denotes upward cutting action, For use with CNC machines. -
With either an up or downward cutting action. NEG code denotes downward cutting action, POS code denotes upward cutting action, For use with CNC machines. -
With either an up or downward cutting action. NEG code denotes downward cutting action, POS code denotes upward cutting action, For use with CNC machines. -
With either an up or downward cutting action the chipbreaker design allows for faster feed rates where end finish is less important. NEG code denotes downward cutting action, POS code denotes upward cutting action, For use with CNC machines. -
With either an up or downward cutting action the rougher / hogging design allows for faster feed rates where end finish is less important. NEG code denotes downward cutting action, POS code denotes upward cutting action,, For use with CNC machines. -
SINGLE FLUTE SOLID CARBIDE UPCUT SPIRAL For use on plastics, acrylics, foam, ABS, ACP and light metals. DESCRIPTION These tools are designed to give a smooth finish on hard plastics. -
STC Spiral The accepted solid carbide cutter for machining and routing acrylics, plastics and Perspex. The helical cut gives a much easier lead into the material preventing snatching and chipping on cut. DESCRIPTION Perfect preparation before flame polishing of Perspex. Downcut for chip-free finish on MFC. DC in product code denotes Downcut. * = For use on very fine acrylics where downward cutting action will prevent vibration and component lifting. Use a P.T.F.E. spray to enhance performance and prevent waste from welding to the tool. -
DESCRIPTION These cutters are designed with a plunge facility for creating slots or channels for locks and drainage. -
DESCRIPTION Designed with a plunge facility for creating slots or channels for locks and drainage the relieved narrow neck section behind the cutting edge allows for a greater plunging depth. -
DESCRIPTION Made from solid tungsten carbide these are designed with a plunge facility for creating slots or channels for locks and drainage. -
DESCRIPTION These cutters are designed with a plunge facility for creating slots or channels for locks and drainage. The double flute makes them more suitable for non ferrous metals. -
DESCRIPTION Water slot range of cutters with single straight flute design and a shorter relief slot on opposite side of cutting edge to assist plunging. -
Premier Economy Plus CNC routers for jointing, rebating and grooving in solid woods, melamine, paper, HPL-laminated foiled and veneered panels. DESCRIPTION Z = 2 Diameters 8 & 10mm have a carbide body to minimize vibration. Negative shear angle to ensure a fine cut on the surface of the material. Full cut with continuous tips to achieve a fault free finish. n.max = 24,000 rpm and feed speed depends on the material 1-9m/minute Z = 2+2 TCT plunge tip for diagonal plunge cutting. Staggered tips with opposite shear angles for a smoother cut and better finish. Great cutting quality thanks to the 4-wing design of the tips. Less cutting forces and less noise thanks to the optimized tool body also ensures a longer cutting edge than the Z=2 economy cutter. n.max = 24,000 rpm and feed speed up to 5 - 15m/minute (with smaller cut depths up to 20m/min) can be achieved. High quality finish and excellent cut durability due to opposite axial angles with 2 alternate tips for the perfect finish on both sides of the board. Shaped for the best dust extraction and tool durability. TCT Plunge Tip. Reduced PCD tip height. Screw for regulating the mount height of the shank on 16, 20 and 25mm shank diameters. Special bodies in 8mm and 10mm to avoid breakage. Gold coating. -
PCD 2+1 Stumpy Especially applicable for groooving, jointing, rebating of composite materials (HPL, CPL, Trespa), Solid Surfaces including Corian, Hi-macs, Staron, Avonite and thermoplastics materials. DESCRIPTION Geometry of cutting edges with alternate shear cut adapted for routing operation in abrasive and difficult to cut materials. With PCD center tip for ramp plunge cutting. Application data: Composite materials. n.max = 14,000 rpm and feed speed up to 3 - 5m/minute -
Premier Economy Metric Suitable for grooving, routing, trimming in CNC routers, materials including chipboards and MDF plain or melamine faced, laminates, decorative paper, veneer etc and hard and exotic woods, thermoplastics, duroplastics, compacts, Trespa, Corian and other solid surfaces. DESCRIPTION Economy series High quality finish and excellent cut durability due to opposite axial angles with 2 alternate tips for the perfect finish on both sides of the board. Shaped for the best dust extraction and tool durability. TCT Plunge Tip. Reduced PCD tip height. Screw for regulating the mount height of the shank on 25mm shank diameter. Special bodies in 8mm and 10mm to avoid breakage. * With reinforced body * Also available in left hand rotation
-
Premier Economy Plus CNC routers for jointing, rebating and grooving in solid woods, melamine, paper, HPL-laminated foiled and veneered panels. DESCRIPTION Z = 2 Diameters 8 & 10mm have a carbide body to minimize vibration. Negative shear angle to ensure a fine cut on the surface of the material. Full cut with continuous tips to achieve a fault free finish. n.max = 24,000 rpm and feed speed depends on the material 1-9m/minute Z = 2+2 TCT plunge tip for diagonal plunge cutting. Staggered tips with opposite shear angles for a smoother cut and better finish. Great cutting quality thanks to the 4-wing design of the tips. Less cutting forces and less noise thanks to the optimized tool body also ensures a longer cutting edge than the Z=2 economy cutter. n.max = 24,000 rpm and feed speed up to 5 - 15m/minute (with smaller cut depths up to 20m/min) can be achieved. High quality finish and excellent cut durability due to opposite axial angles with 2 alternate tips for the perfect finish on both sides of the board. Shaped for the best dust extraction and tool durability. TCT Plunge Tip. Reduced PCD tip height. Screw for regulating the mount height of the shank on 16, 20 and 25mm shank diameters. Special bodies in 8mm and 10mm to avoid breakage. Gold coating.
-
PCD 2-Flute Economy Nesting (Z=2) Economy high performance shank cutter for grooving (Nesting application) of chipboard, MDF, multiplex, wood based panels with or without coatings. DESCRIPTION This economy nesting tool has a steel body and Z = 2 for only simple nesting applications and lower feed rates (5-8m/min)
-
PCD 3+3 Premier Nesting High performance shank cutter for grooving (Nesting application) of chipboard, MDF, multiplex, wood based panels with or without coatings. DESCRIPTION High performance nesting cutter with spiral cutting edge and alternate shear angles and gullets, for optimal chip removal at fast feed rates. For tear free cut edges on both sides of the work piece. With PCD plunge tip. Z = 2 + 2 Feed rates depending on number of teeth and diameter as well as material up to 30m/min (n.max 24,000)
-
PCD 3+3 Premier Nesting High performance shank cutter for grooving (Nesting application) of chipboard, MDF, multiplex, wood based panels with or without coatings. DESCRIPTION High performance nesting cutter with spiral cutting edge and alternate shear angles and gullets, for optimal chip removal at fast feed rates. For tear free cut edges on both sides of the work piece. With PCD plunge tip. Z = 3 + 3 Feed rates depending on number of teeth and diameter as well as material up to 30m/min (n.max 24,000) -
PCD High Speed Tractor Wheel (Z=3+3) For jointing and formatting of chipboards and MDF, vaneered boards, pressed woods etc... with coatings of melamine, paper laminate also plywood, hard and soft woods. DESCRIPTION A 3 wing cutter, tipped without gaps and increased shear angle to optimise the finish on any type of coating Perfect edge quality Real Z=3 tipping without gaps Optimised cutting edge positioning for less overlap marks n.max = 18-24,000 rpm and feed due to large cutter diameter up to 35m/minuite and lateral adjustment og 0.5-15mm
-
PCD 2+4 Turbo 4 Suitable for grooving, trimming, profiling in CNC routers materials like chipboards and MDF plain or covered with melamine, laminates, decorative paper, veneer etc and exotic woods, thermoplastic materials, duroplastics, compacts, Corian, Trespa and other solid surfac materials. DESCRIPTION Smooth feed action thanks to the 2 + 4 tips placed progressively with opposite axial angles and concave castings for perfect dust extraction. Tip height allows for multiple re-sharpenings making this high performance tool very economical. A tool of high performance. PCD plunge tip. Adjustment of the tool height with the screw in the shank. -
FLUSH TRIM BEARING GUIDED 90 DEG DOUBLE FLUTE TCT & PCD Widely used for copy profiling and flush trimming .These industrial quality premium grade tungsten carbide flush trimmers are ideal for wood, plywood, MDF and other wood composites, plastics, and solid surface materials DESCRIPTION NEW PRODUCT The cutter reference TTPCDIBGT90LK is a standard flush type trimmer with a 1/4 shank for use in a portable router with tips made from Polycrystalline diamond which has a greater wear resistance to glue and resins found in laminated materials
-
TCT Capillary Groove Capillary groove cutters for sills and window sections. DESCRIPTION TTUSD36 for use with the Schlegel Q-LON weatherstrip. -
TCT Capillary Water Channel Groove All cutters in this range are non plunging but with bottom cutting action. DESCRIPTION This is designed to place a capillary groove on sill sections when used on site in a portable machine. -
TCT Weatherseal Recessing & Seals The perfect weatherstrip cutter, ideal for use with a portable router on site. DESCRIPTION TTWSC2 is used without a bearing. TTWSC3 has a 90mm overall length to suit 40-50mm rebate on doors. TTWSC4 routs a 2.7mm groove, 6mm deep. TTWSC5 suits the slot seal Carripile I weatherstrip system. TTSSC1 is a Smoke Seal cutter, designed to run off the bearing and give correct depth of cut to take a Quick Fit Smoke Seal Strip. -
Weatherstrip Cutters A range of cutters designed to make the fitting of weatherstrip to door and window frames quick and easy. -
Solid Carbide Burrs Ideally suited for freehand stock removal, weld preparation and finishing of nimonic alloy components. A smooth finish can be achieved on metal, plastic and other materials. RPM for each product in this range: TTSCB1 - 10,000-30,000 TTSCB2 - 20,000-90,000 TTSCB3 - 10,000-30,000 TTSCB4 - 20,000-50,000 TTSCB5 - 10,000-30,000 TTSCB6 - 20,000-50,000 TTSCB7 - 10,000-30,000 TTSCB8 - 10,000-30,000 TTSCB9 and TTSCB95 - 20,000-50,000 TTSCB10 - 20,000-50,000 TTSCB11-TTSCB14 - 20,000-50,006
