Titman - defining router tooling

Trade Range - Imperial Shanks

Here you will find a range of quality TCT router cutters designed for the tradesman when using portable hand routers with 1/4 and 1/2 shanks. These are ideal for use whilst routing onsite or in a small workshop, these are for use on a variety of wood based and composite materials.
Set Descending Direction

Items 13-20 of 20

  1. DOVETAIL

    DOVETAIL

    Tungsten carbide two flute dovetail router cutter which can also be used with the popular dovetail jigs. This is a proved and tested method for making reliable, stable joints for boxes and drawers. Ideal for hardwood, softwood and MDF.
  2. INTUMESCENT STRIP  REBATER

    INTUMESCENT STRIP REBATER

    Tungsten carbide two flute self guiding router cutters with top / shank mounted bearing designed to cut slots of 10mm,15mm and 20mm wide and 4mm deep to insert intumescent strip into fire doors.
  3. KEYHOLE

    KEYHOLE

    Tungsten carbide single flute keyhole slot router cutter for hanging items flush to a wall by making an aperture in the back of the workpiece to allow No 8 & No 10 Screw heads to be used. Ideal for hardwood, softwood, MDF, plastics and composites.
  4. HINGE SINK EURO STYLE

    HINGE SINK EURO STYLE

    Tungsten carbide two wing hinge sinking router cutters featuring cleaner sharper edges and efficient waste clearance. Will produce a 35mm recess for circular hinges in hardwood, softwood, MDF, chipboard and laminated boards
  5. SLOTTING

    SLOTTING

    Tungsten carbide two flute self guided slotting cutter diameter with bottom mounted bearing. Bearing diameter can be changed to alter the depth of the slot into the material.
  6. STEPPED REBATE

    STEPPED REBATE

    Tungsten carbide two flute router cutter for the popular Tonk strip shelving support system.
  7. TONGUE & GROOVE SET

    TONGUE & GROOVE SET

    Tungsten carbide four wing self guided tongue and groove router cutter set, arbor mounted with bearing and spacers to produce a tongue and groove in timbers of 15mm-18mm in thickness. Ideal for hardwood, softwoods, MDF and chipboard.
  8. WEATHERSEAL GROOVER

    WEATHERSEAL GROOVER

    Tungsten carbide two flute self guiding weather seal router cutters with bearing, designed to cut slot in doors and windows for the popular weather seals such as Aquamac 63 and 21 strips and a range of self guiding slotters for groove widths of 2.5mm, 2.8mm and 3.0mm.
Set Descending Direction

Items 13-20 of 20